Performance Springs Mitsubishi 4G63 16v Valve springs
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
Valve Spring Set for Mitsubishi 4G63 16V Engines
This spring assembly is suitable for 4G63 16-valve engines requiring increased valvetrain stability, particularly in turbocharged applications. The spring rates support elevated RPM operation and upgraded camshaft profiles.
Designed as a drop-in replacement using factory retainers.
| Product Name | Performance Springs Mitsubishi 4G63 16v Valve springs |
|---|---|
| Brands | Performance Springs |
| Engine | 4G63, 4G63 1G (6-Bolt), 4G63 2G, 4G63 2G (7-Bolt), 4G64 with 4G63 2G Head |
| Make | Mitsubishi |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What are the specifications of the Performance Springs for the Mitsubishi 4G63?
The Performance Springs for the Mitsubishi 4G63 are designed to handle higher RPMs and increased boost levels, making them suitable for performance applications. They provide improved valve control and reduce the risk of valve float under high-stress conditions.
Do I need to machine my cylinder head to fit these valve springs?
In most cases, the Performance Springs for the 4G63 should fit without additional machining. However, it's essential to check for proper clearance with your specific setup, especially if you are using aftermarket camshafts or have modified the head.
What is the recommended installation procedure for these valve springs?
When installing the Performance Springs, ensure that the valve seats are clean and free from debris. Use a valve spring compressor to safely install the springs and retainers, and check for proper installed height to maintain optimal performance.
Can these valve springs be used with stock camshafts?
Yes, these Performance Springs can be used with stock camshafts. However, for optimal performance, especially at higher RPMs, consider using them with upgraded camshafts designed for performance applications.
What is the maximum RPM these valve springs can handle?
While the Performance Springs are designed for high-performance applications, the maximum RPM they can handle will depend on the overall engine build, including the camshaft profile and valvetrain setup. It's crucial to ensure proper tuning and clearances to avoid valve float.
