Our Blog
All blog posts
-
An LS crankshaft can be the right stroke and still be wrong for your engine. Before ordering, match it to the rods and pistons, the engine's crank-position signal, and the parts that attach at each e...
-
If you need replacement rings for CP pistons, start with the piston part number and the finished bore size. Ordering a set because it suits the same engine, or because the bore diameter looks right, ...
-
Before ordering forged pistons, settle the crank stroke, conrod length and finished block height with your engine builder. Bore size and a quoted compression ratio will narrow the choices, but they ...
-
#spool-mako-dash-mounts a:not(.action){color:#d71920;text-decoration:underline;text-underline-offset:2px} #spool-mako-dash-mounts figure{margin:24px 0}#spool-mako-dash-mounts figure img{display:bloc...
-
If your LS1 is coming apart, a stroker kit can be tempting. You are already paying for machining and assembly, so adding capacity seems like the obvious next step. Sometimes it is. But a good standa...
-
Choosing a Walbro 460, 525 or 535 isn't as simple as picking the biggest number. Those labels don't tell you how much fuel the pump will deliver in your car. In many turbo fuel systems, increasing bo...
-
#spool-boost-reference a:not(.action) { color: #d71920; text-decoration: underline; text-underline-offset: 2px; } #spool-boost-reference .table-wrap { overflow-x: auto; } #spool-boost-reference ta...
-
#spool-1fz-head-sealing a { color: #d71920; text-decoration: underline; text-underline-offset: 2px; } #spool-1fz-head-sealing .table-wrap { overflow-x: auto; } #spool-1fz-head-sealing ta...
-
#spool-rb-oil-pump-guide a:not(.action) { color: #d71920; text-decoration: underline; text-underline-offset: 2px; } #spool-rb-oil-pump-guide table { width: 100%; border-co...
-
Building a Complete Haltech Nexus R3 Engine Management System for a Ford Barra The Ford Barra has reached the point where four-figure horsepower builds are relatively common, but the engine managem...