Chevy LS7 12° Heads 4.135 bore, 4.000 stroke, 6.125 rod, 1.120 CH, -4.6cc Flat Top 1.2mm, 1.2mm, 3mm rings (CP Bullets BLSR1204-010)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Chevrolet |
|
Engine Type |
LS7 Series |
|
Part Number |
BLSR1204-010 |
|
Bore (in) |
4.135 |
|
Stroke (in) |
4 |
|
Rod Length (in) |
6.125 |
|
Comp Height |
1.12 |
|
Head Type |
LS7 |
|
Head CC |
70 |
|
Dome / Dish Height |
FT |
|
Dom/Dish CC |
-4.6 |
|
Compression Ratio |
11.2 |
|
Pin |
.927 x 2.250 |
|
Ring Thickness |
1.2 x 1.2 x 3.0mm |
|
VR Depth |
-.220 / -.161 |
|
Cubic Inch |
430 |
|
Piston Weight |
472 |
|
Style |
FT |
|
Valve Reliefs |
2 VR's |
|
Gas Port |
No |
| Product Name | Chevy LS7 12° Heads 4.135 bore, 4.000 stroke, 6.125 rod, 1.120 CH, -4.6cc Flat Top 1.2mm, 1.2mm, 3mm rings (CP Bullets BLSR1204-010) |
|---|---|
| Brands | CP Carrillo |
| Engine | GM / LS |
| Make | Chevrolet, GM, Holden, LS Chev |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended compression ratio for the BLSR1204-010 pistons?
The BLSR1204-010 pistons are designed to achieve a compression ratio of approximately 11.2:1 when used with LS7 cylinder heads that have a 70cc combustion chamber. Ensure that your engine's overall assembly and tuning are optimised for this compression ratio.
What are the specific ring thicknesses for the BLSR1204-010 pistons?
The BLSR1204-010 pistons come with a ring package of 1.2mm for both the top and second rings, and a 3.0mm oil control ring. It's crucial to set the ring gaps according to your specific application and boost levels.
What is the pin size and length for the BLSR1204-010 pistons?
The BLSR1204-010 pistons use a pin size of .927 inches and a length of 2.250 inches. Ensure that your conrods are compatible with these specifications for proper fitment.
What is the weight of the BLSR1204-010 pistons?
Each BLSR1204-010 piston weighs approximately 472 grams. When building your engine, consider this weight in relation to your rotating assembly for balance and performance.
Do the BLSR1204-010 pistons have valve reliefs?
Yes, the BLSR1204-010 pistons feature two valve reliefs. This design is intended to accommodate LS7 cylinder head configurations, but always verify clearances during assembly to avoid interference.
