PULSAR NEXT GEN Billet S369 69/80 DUAL CERAMIC BALL BEARING Turbo
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
Dual ceramic ball bearing systems.
- 6+6 blade 69mm x 91mm billet compressor wheel with extended tapered tip technology for enhanced airflow.
- Inconel 713c turbine wheel, 80mm x 73mm, for high-temperature resilience and performance.
- G2 compressor cover featuring a ported-shroud inlet, integrated with a speed sensor port.
- Max flow rate: 100+ lb/min, rated for 950 FWHP.
Specifications:
- Bearing System: Dual ceramic ball bearings
- Compressor Wheel: 69mm x 94mm
- Turbine Wheel: 80mm x 73mm
- Compressor Inlet: 4.0†Hose
- Compressor Outlet: 2.5†Hose
- Turbine Inlet: T4 Divided
- Turbine Outlet: 4.21†Marmon
- Oil Feed: 1/4†NPT
- Oil Drain: Standard T4 flange
- Note: Outlet flange and clamp are not included.
| Product Name | PULSAR NEXT GEN Billet S369 69/80 DUAL CERAMIC BALL BEARING Turbo |
|---|---|
| Brands | Pulsar |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
How do I choose the right turbo size?
Turbo selection depends on engine size, boost target, rpm range and desired response. A smaller turbo spools faster; a larger turbo supports more top-end power.
Why is wastegate placement important?
Poor placement or sizing can cause boost creep or unstable boost control.
What are the benefits of the dual ceramic ball bearing system in the PULSAR NEXT GEN Billet S369 69/80 Turbo?
The dual ceramic ball bearing system provides reduced friction and improved spool time compared to traditional bearing systems. This allows for quicker response and better performance at higher RPMs, making it ideal for applications where rapid boost response is critical.
What is the maximum flow rate and power rating for the PULSAR NEXT GEN Billet S369 69/80 Turbo?
The PULSAR NEXT GEN Billet S369 69/80 Turbo has a maximum flow rate of over 100 lb/min and is rated for up to 950 FWHP. However, actual performance will depend on the engine setup, tuning, and other factors.
What type of oil feed and drain connections does the PULSAR NEXT GEN Billet S369 69/80 Turbo require?
This turbo requires a 1/4” NPT oil feed connection and a standard T4 flange for the oil drain. Ensure that your oil supply is adequate to prevent damage and maintain optimal performance.
What are the inlet and outlet sizes for the PULSAR NEXT GEN Billet S369 69/80 Turbo?
The compressor inlet is designed for a 4.0” hose, while the compressor outlet is for a 2.5” hose. Make sure to match these sizes with your intake and exhaust systems for proper fitment.
Does the PULSAR NEXT GEN Billet S369 69/80 Turbo include the outlet flange and clamp?
No, the outlet flange and clamp are not included with the turbo. You will need to source these components separately to complete your installation.
-
-
-
Bowden's Own Twisted Mother Sucker Drying Towel 900 x 600mmSpecial Price AUD$50.00 Regular Price AUD$51.82 -
-
Haltech Elite 1500 + Basic Universal Wire-in Harness Kit Length: 2.5m (8')Special Price AUD$2,127.27 Regular Price AUD$2,368.18
