
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
These head gaskets have a larger diameter head stud hole to allow for ARP2000 14mm studs.
Available in:
- Bore Size: 93mm
- Material: MLS
- Thickness: 0.685mm / 0.027"
Cometic Gasket, Inc., is a leading worldwide supplier of shelf stock, custom and short-run gaskets for the performance aftermarket, original equipment and motorsports industries. gaskets to customers worldwide.
MLS (Multi Layer Steel)
The Cometic MLS gasket is comprised of three to five layers of Stainless Steel. Cometic uses Stainless steel for increased strength, its ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250C or 482F.
The center or shim layer of the gasket is comprised of an uncoated Stainless Steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for any kind of head and block combination. By design the MLS gasket promotes an even torque load across the sealing surface allowing for measurable reduced bore distortion.
| Product Name | Cometic XR6 Barra BA - FG Ford Multi Layer Head Gasket suit 14mm Head Studs |
|---|---|
| Brands | Cometic |
| Engine | Barra XR6 |
| Make | Ford |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What surface finish is required for an MLS head gasket?
MLS gaskets require a smooth, consistent RA surface finish on both the block and head. Your machinist should follow the gasket manufacturer’s recommended RA values.
Can I reuse head studs or bolts?
Quality studs may be reused if undamaged. Torque-to-yield bolts are usually single-use. Follow the fastener manufacturer’s recommendations.
What is the recommended bore size for the Cometic XR6 Barra head gasket?
The Cometic XR6 Barra head gasket is designed for a bore size of 93mm, making it suitable for performance applications where this bore size is required.
What thickness does the Cometic XR6 Barra head gasket have?
This head gasket has a thickness of 0.685mm (0.027 inches), which helps to maintain optimal compression and sealing under high-performance conditions.
What type of head studs are compatible with this head gasket?
The Cometic XR6 Barra head gasket features a larger diameter head stud hole to accommodate ARP2000 14mm head studs, ensuring a secure fit for high-performance applications.
What material is the Cometic XR6 Barra head gasket made from?
This head gasket is made from Multi Layer Steel (MLS), which consists of multiple layers of stainless steel for enhanced strength, durability, and resistance to corrosion.
What temperature can the Viton coating on this head gasket withstand?
The Viton coating on the Cometic XR6 Barra head gasket is heat resistant up to 250°C (482°F), making it suitable for demanding engine environments.
-
Walbro 460LPH In Tank Fuel Pump Kit E85 (F90000267)Special Price AUD$190.00 Regular Price AUD$226.36
-
Ford XR6 Turbo Barra Billet Oil Pump GearsAUD$380.00
-
Different Head Gasket Types Explained Head gaskets are one of the most misunderstood parts of a high-performance engine build. Many enthusi...
-
The Truth About Head Studs for High-Boost Engines Once boost pressure starts climbing, the cylinder head becomes one of the most heavily s...

