Performance Springs Nissan RB30ET Dual Valve Springs – PS 1006134D
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
Performance Springs PS 1006134D Dual Valve Springs are designed specifically for the Nissan RB30ET engine.
These performance dual valve springs are designed to provide improved valve train control for Nissan RB30ET performance applications, with a maximum specified valve lift of 0.470".
The PS 1006134D has an installed height of 1.575" and provides 95 lb of seated spring pressure and 225 lb of open pressure at 10 mm lift.
Product Specifications:
- Spring Type: Dual
- Maximum Valve Lift: 0.470"
- Installed Height: 1.575"
- Seated Pressure: 95 lb
- Open Pressure: 225 lb @ 10 mm lift
- Outside Diameter: 33.6 mm
- Inside Diameter: 18.6 mm
- Coil Bind: 22.7 mm
What's Included:
- 12 × Performance Springs PS 1006134D Dual Valve Springs
Performance Valve Springs specifies that the Nissan RB30ET requires 12 valve springs for a complete engine. The supplier's page currently contains a linked quantity reference to PS 1006134L, despite the product itself being identified as PS 1006134D, so the part number should be verified with the supplier if ordering.
Important: Always verify valve lift, installed height, spring dimensions, pressures, coil bind clearance, retainer compatibility and application suitability before installation. Performance Valve Springs states that valve spring pressure specifications have an approximate ±8% tolerance. The installer is responsible for checking and rechecking all dimensions, pressures, applications and specifications before, during and after installation.
| Product Name | Performance Springs Nissan RB30ET Dual Valve Springs – PS 1006134D |
|---|---|
| Brands | Performance Springs |
| Engine | RB30ET |
| Make | Nissan |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
If you are outside of Australia, you are responsible for any duty or taxes charged by your government."
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What engine or application does PS-1006134D suit?
Performance Springs Nissan RB30ET Dual Valve Springs – PS 1006134D is intended for the engine or application stated in the product title. Cylinder-head, camshaft and valvetrain combinations can vary, so confirm the part number and specifications before ordering.
What type of valve spring setup is PS-1006134D?
PS-1006134D is a dual-spring product. Check the listed installed height, seat pressure, open pressure, maximum lift and coil-bind dimensions against the requirements of your camshaft and cylinder head.
What is included with PS-1006134D?
This listing is for the valve-spring product described. Retainers, locks, locators, shims and other components are included only where specifically stated in the listing.
Can these valve springs be installed without measuring the valvetrain?
No. Installed height, actual spring pressure, maximum valve lift, coil-bind clearance, retainer-to-seal clearance and retainer/lock compatibility must be measured on the assembled cylinder head.
Is professional installation recommended?
Yes. Valve-spring selection and setup directly affect valvetrain control and engine reliability. Installation should be completed or checked by an experienced engine builder.
