ACL 1JZ/ 2JZ Thrust washers
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
Description:
ACL Race Thrust Bearings
Would Suit :
All 1JZ/2JZ Engines
Other Information:
Whole thrust set
| Product Name | ACL 1JZ/ 2JZ Thrust washers |
|---|---|
| Brands | ACL |
| Engine | JZ, 1JZ, 1JZ-GTE, 2JZ, 2JZ-GTE |
| Make | Toyota |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the purpose of the ACL 1JZ/2JZ thrust washers?
The ACL thrust washers are designed to maintain the proper clearance between the crankshaft and the engine block, preventing excessive movement of the crankshaft in the axial direction. This is crucial for engine stability and performance.
Are these thrust washers suitable for high-performance applications?
Yes, ACL Race Thrust Bearings are engineered for high-performance applications, making them suitable for both street and race use in 1JZ and 2JZ engines. However, proper installation and machining practices must be followed to ensure optimal performance.
Do I need to machine the thrust surfaces when installing these washers?
It is advisable to check the thrust surfaces for wear and proper clearance before installation. Depending on the condition of your engine, you may need to machine the thrust surfaces to achieve the correct fit and ensure reliable operation.
How do I know if my thrust washers need replacement?
Signs that your thrust washers may need replacement include excessive crankshaft end play, unusual engine noises, or signs of wear on the thrust surfaces. Regular inspection during engine rebuilds is recommended to prevent potential engine damage.
What is included in the whole thrust set for the 1JZ/2JZ engines?
The whole thrust set includes all necessary thrust washers required for the 1JZ and 2JZ engines, ensuring you have everything needed for a complete and proper installation.
