Spool Mitsubishi 4G63 Stroker Crankshaft - 100mm
Mitsubishi 4G63 100mm Billet 4340 Stroker Crankshaft - Rated at 1000HP plus / 10,000 rpm
This is a true billet crankshaft machined from Billet 4340 core stock (not a cast forging blank that is final machined).
Each crank is machined from core stock 4340 on a CNC machine, then Nitrided and final ground.
Rated at 1000HP plus
With the increased cubic capacity from the 100mm stroker crank, increases of up to 50% in torque and low to mid range power are achievable. Boost will come on earlier in the rev range and peak power will increase.
Full Billet 4340 - Nitrided, Balanced and Full Counter Weight Crankshaft
The 4G63 engine in its factory form has a 85mm bore and 88mm stroke, giving a displacement of 1997cc.
Using the 100 mm stroker crank, std length conrods and custom pistons, the displacement is increased as follows:
- 85.5mm bore and the 100mm stroker crank = 2297cc / 300cc increase
- 86 mm bore and the 100 mm stroker crank = 2324cc / 327cc increase
Note: If conrod to block interference occurs, slight clearancing maybe required.
- Crank Weighs 16kg
- 4340 Grade Billet Steel
- Fully Counter Weighted
- Nitrided Finish
- Fully Balanced
- Stroke 100mm
|Product Name||Spool Mitsubishi 4G63 Stroker Crankshaft - 100mm|
We are an Australian based company which ships items nationally and international usually within 48 hours of receiving your order. All items shipped internationally are sent express air freight unless otherwise instructed.
You can calculate shipping rates inside the cart. After adding all the products you would like, navigate to the cart and fill in your Country, State and Postcode.
Our shipping providers do not deliver to PO Boxes.
If you have issues calculating freight please get in touch.
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure get in touch with firstname.lastname@example.org.