Performance Springs Ford Cross Flow V8 Dual Valve Springs
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
Performance Springs CLBBSB1 Dual Valve Springs are designed for performance Ford Cross Flow applications where increased valve train control and higher spring pressures are required.
The CLBBSB1 is a heavy-duty dual valve spring with a 1.490" outside diameter and a 1.800" installed height. It provides 130 lb of seat pressure at 1.800" and 345 lb at 1.250".
These springs are suitable for performance engine builds where reliable valve control and increased spring pressure are required. Always confirm the exact engine application, installed height, valve lift, retainer compatibility and coil bind clearance before installation.
Product Specifications:
- Outside Diameter: 1.490" (37.8 mm)
- Inside Diameter: 0.835" (21.2 mm)
- Installed Height: 1.800" (45.7 mm)
- Seat Pressure: 130 lb @ 1.800"
- Open Pressure: 345 lb @ 1.250"
- Coil Bind: 0.970" (24.6 mm)
What's Included:
- Performance Springs CLBBSB1 Dual Valve Springs
Performance Valve Springs specifies that spring pressure figures are mean values and can vary by approximately ±8%. Spring dimensions and clearances should always be checked during engine assembly.
Important: Verify the intended Ford Cross Flow engine application, valve lift, installed height, retainer compatibility and minimum coil-bind clearance before installation. Performance Valve Springs recommends a minimum 0.060" clearance between total valve lift and coil bind.
| Product Name | Performance Springs Ford Cross Flow V8 Dual Valve Springs |
|---|---|
| Brands | Performance Springs |
| Engine | 250 XFlow |
| Make | Ford, Mazda |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
If you are outside of Australia, you are responsible for any duty or taxes charged by your government."
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
