Ford 5.0L Gen 1 & 2 4V Coyote 3.700 Bore, 5.932 rod, 1.165 CH +5.06cc Dome 11.5 CR (CP Bullets BF9876-070)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
Ford 5.0L Gen 1 & 2 4V Coyote 3.700 Bore, 5.932 Rod, 1.165 CH +5.06cc Dome 11.5 CR (CP Carrillo BF9876-070)
Upgrade your Ford 5.0L Gen 1 & 2 4V Coyote engine with the high-performance CP Carrillo BF9876-070 pistons. Designed for enthusiasts seeking enhanced power and reliability, these pistons are engineered to deliver optimal performance under demanding conditions. With a 3.700 bore and a 5.932 rod, they ensure a perfect fit and superior durability. The 1.165 compression height and +5.06cc dome provide an impressive 11.5 compression ratio, making them ideal for high-performance applications.
- Engine Compatibility: Ford 5.0L Gen 1 & 2 4V Coyote
- Bore Size: 3.700 inches
- Rod Length: 5.932 inches
- Compression Height: 1.165 inches
- Dome Volume: +5.06cc
- Compression Ratio: 11.5:1
- Brand: CP Carrillo
- Model Number: BF9876-070
These pistons are crafted with precision to ensure maximum efficiency and longevity. Whether you're building a race car or enhancing your street vehicle, the CP Carrillo BF9876-070 pistons are the perfect choice for achieving superior engine performance.
| Product Name | Ford 5.0L Gen 1 & 2 4V Coyote 3.700 Bore, 5.932 rod, 1.165 CH +5.06cc Dome 11.5 CR (CP Bullets BF9876-070) |
|---|---|
| Brands | CP Carrillo |
| Engine | Coyote 5.0L V8 |
| Make | Ford |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the CP Carrillo BF9876-070 pistons?
For the CP Carrillo BF9876-070 pistons, a typical bore clearance of 0.0030" to 0.0035" is recommended. However, this can vary based on specific engine build conditions and intended use, so always consult your engine builder for precise specifications.
What type of fuel is suitable for the 11.5:1 compression ratio of these pistons?
With an 11.5:1 compression ratio, it's advisable to use high-octane fuel, typically 98 RON or higher, to prevent detonation and ensure optimal performance. Always consider your tuning setup and engine management system to match fuel quality with boost levels and timing.
Do I need to modify my engine block to fit the BF9876-070 pistons?
The BF9876-070 pistons are designed to fit the Ford 5.0L Gen 1 & 2 Coyote engines, but you may need to check for proper clearance with the cylinder heads and ensure that the block is machined to the correct specifications. It's essential to verify that the piston-to-valve clearance is adequate for your specific setup.
What is the weight of the CP Carrillo BF9876-070 pistons?
The weight of the CP Carrillo BF9876-070 pistons is approximately 450 grams each. This weight can influence engine balance and performance, so consider it when assembling your rotating assembly.
Are these pistons suitable for forced induction applications?
Yes, the CP Carrillo BF9876-070 pistons are suitable for forced induction applications, given their robust design and high compression ratio. However, ensure that your engine is properly tuned and that you monitor boost levels to maintain reliability and performance.
