Ford 5.0L Gen 1 & 2 4V Coyote 3.680 Bore, 5.932 rod, 1.165 CH +5.06cc Dome 11.5 CR (CP Bullets BF9876-050)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
Ford 5.0L Gen 1 & 2 4V Coyote 3.680 Bore, 5.932 Rod, 1.165 CH +5.06cc Dome 11.5 CR (CP Carrillo BF9876-050)
Upgrade your Ford 5.0L Gen 1 & 2 4V Coyote engine with the high-performance CP Carrillo BF9876-050 pistons. Designed for enthusiasts seeking enhanced power and reliability, these pistons offer superior performance and durability. Perfect for both street and track applications, they ensure optimal engine efficiency and longevity.
- Bore Size: 3.680 inches
- Rod Length: 5.932 inches
- Compression Height: 1.165 inches
- Dome Volume: +5.06cc
- Compression Ratio: 11.5:1
- Compatibility: Ford 5.0L Gen 1 & 2 4V Coyote engines
- Application: Ideal for high-performance street and track use
Engineered with precision, these pistons are crafted to withstand high pressures and temperatures, ensuring your engine performs at its best. Trust CP Carrillo for quality and performance that meets the demands of serious automotive enthusiasts.
| Product Name | Ford 5.0L Gen 1 & 2 4V Coyote 3.680 Bore, 5.932 rod, 1.165 CH +5.06cc Dome 11.5 CR (CP Bullets BF9876-050) |
|---|---|
| Brands | CP Carrillo |
| Engine | Coyote 5.0L V8 |
| Make | Ford |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the CP Carrillo BF9876-050 pistons?
For the CP Carrillo BF9876-050 pistons, a typical bore clearance of 0.0030" to 0.0035" is recommended. This ensures proper thermal expansion and optimal performance, but always verify with your specific engine build and conditions.
What compression ratio can I expect with the CP Carrillo BF9876-050 pistons in my Coyote engine?
The CP Carrillo BF9876-050 pistons provide a compression ratio of 11.5:1 when used with the appropriate cylinder head and gasket combination. Ensure that your engine is tuned to handle this compression for optimal performance.
Do I need to modify my engine block to fit the CP Carrillo BF9876-050 pistons?
In most cases, the CP Carrillo BF9876-050 pistons should fit without major modifications to the engine block. However, it's essential to check for any necessary clearancing, especially if using aftermarket components or modifications.
What is the maximum RPM I can safely run with these pistons?
While the CP Carrillo BF9876-050 pistons are designed for high-performance applications, the maximum RPM will depend on your overall engine build, including rod and crankshaft specifications. Typically, these pistons can handle RPMs in the range of 7,000 to 8,000, but ensure proper tuning and clearances are maintained.
