Ford 5.0L Gen 3 4V Coyote 3.6614 Bore, 5.932 rod, 1.165 CH +5.07cc Dome 11.5 CR (CP Bullets BF9877-STD)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
Ford 5.0L Gen 3 4V Coyote 3.6614 Bore, 5.932 Rod, 1.165 CH +5.07cc Dome 11.5 CR (CP Carrillo BF9877-STD)
Upgrade your engine's performance with the Ford 5.0L Gen 3 4V Coyote pistons, designed for enthusiasts seeking superior power and reliability. These CP Carrillo BF9877-STD pistons are engineered to deliver optimal performance for your Ford engine, ensuring a perfect fit and enhanced efficiency.
- Precision Engineering: Crafted with a 3.6614 bore and 5.932 rod for exact specifications.
- High Compression Ratio: Features a +5.07cc dome and 11.5 CR for increased power output.
- Durable Construction: Built to withstand high-performance demands and ensure longevity.
- Optimized Performance: Enhances engine efficiency and power delivery for a superior driving experience.
- Perfect Fit: Designed specifically for the Ford 5.0L Gen 3 4V Coyote engine.
Whether you're upgrading for racing or daily driving, these pistons provide the reliability and performance you need. Experience the difference with CP Carrillo' precision-engineered components.
| Product Name | Ford 5.0L Gen 3 4V Coyote 3.6614 Bore, 5.932 rod, 1.165 CH +5.07cc Dome 11.5 CR (CP Bullets BF9877-STD) |
|---|---|
| Brands | CP Carrillo |
| Engine | Coyote 5.0L V8 |
| Make | Ford |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the CP Carrillo BF9877-STD pistons?
For the CP Carrillo BF9877-STD pistons, a typical bore clearance of 0.0030" to 0.0035" is recommended. However, this can vary based on your specific engine build and intended use, so it's best to consult with your engine builder for precise measurements.
What compression ratio can I expect with the BF9877-STD pistons in my Coyote engine?
The BF9877-STD pistons provide an 11.5:1 compression ratio when used with the appropriate cylinder head and gasket combination. Ensure that your engine is properly tuned to handle this compression for optimal performance.
Do I need to modify my engine block to fit the BF9877-STD pistons?
In most cases, the BF9877-STD pistons should fit without major modifications, but you may need to check for proper clearance with your connecting rods and ensure that the block is machined to the correct specifications. Always verify with your engine builder.
What is the recommended ring gap for the BF9877-STD pistons?
The recommended ring gap for the BF9877-STD pistons typically ranges from 0.018" to 0.022" for the top ring and 0.020" to 0.025" for the second ring. These gaps can be adjusted based on your specific application and boost levels.
What type of fuel should I use with the BF9877-STD pistons?
For optimal performance with the BF9877-STD pistons, it is recommended to use high-octane fuel, typically 98 RON or higher, especially if running at higher compression ratios or boost levels. Always ensure your fuel quality is consistent to prevent detonation.
