ARP 2000 RB30DET Main Studs (202-5403)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
ARP 2000 RB30DET Main Studs (202-5403) - Just Released!
Upgrade your engine's performance with the newly released ARP 2000 RB30DET Main Studs (202-5403). Crafted from premium ARP 2000 material, these main studs boast an impressive tensile strength of 220,000 psi, surpassing the previous 8740 material's 190,000 psi. Designed for durability and precision, these studs are heat-treated before thread rolling and machining, ensuring optimal performance under extreme conditions.
- Material: Premium ARP 2000
- Tensile Strength: 220,000 psi
- Includes 12-point nuts for secure fastening
- Comes with hardened parallel washers for even load distribution
- Ensures accurate torque readings
Enhance your vehicle's reliability and performance with these top-of-the-line main studs, perfect for high-performance applications. Experience the difference in quality and strength with ARP's pro series kits.
| Product Name | ARP 2000 RB30DET Main Studs (202-5403) |
|---|---|
| Brands | ARP |
| Engine | RB30, RB30DET (DOHC) |
| Make | Nissan |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What is the difference between ARP2000, L19 and CA625+?
ARP2000 suits most high-performance builds. L19 offers higher strength but is sensitive to handling and corrosion. CA625+ is used for extreme cylinder pressure or rpm.
Why is ARP lubricant important?
ARP torque values assume Ultra-Torque lubricant on threads and under the head. Without it, clamp load becomes unpredictable.
What is the recommended torque specification for the ARP 2000 RB30DET main studs?
For the ARP 2000 main studs, the recommended torque specification is typically around 80 ft-lb when using ARP Ultra-Torque lubricant. Always refer to ARP's latest instructions for the most accurate guidelines.
Do I need to line bore my main caps when using ARP 2000 main studs?
Yes, it is advisable to line bore the main caps after installation of the ARP 2000 main studs to ensure proper alignment and clearances, especially in high-performance applications.
Can I use the ARP 2000 main studs with a stock RB30DET engine?
While the ARP 2000 main studs can be used with a stock RB30DET engine, they are designed for high-performance applications. Ensure that your engine build and tuning are suited to handle the increased strength and reliability these studs provide.
What additional components should I consider when installing ARP 2000 main studs?
When installing ARP 2000 main studs, consider using hardened parallel washers for even load distribution and ensure that your main caps are properly torqued to specification. Additionally, check for proper main bearing clearances during installation.
Are the ARP 2000 main studs compatible with aftermarket main caps?
Yes, the ARP 2000 main studs are generally compatible with aftermarket main caps, but it is essential to verify fitment and ensure that the caps are properly aligned and torqued according to specifications.
