Spool Billet 4340 full counter weight 91mm nitrided Stroker Crankshaft
Spool H Or Drag PRO I Beam Forged Connecting Rods with ARP-2000 Bolts (ARP L19 Bolts available as an upgrade)
CP Custom Pistons (rings, pins and locks included) 86.5mm 9.0:1 (we can get any comp and bore custom made for you for additional $200 and 6-8 weeks delay)
9310 0.200" Gudgeon Pins standard (0.250" Pins available as an upgrade)
Like all Spool cranks, this is a true billet crank machined from forged 4340 bar stock.
All components, crank, connecting rods and pistons are balanced.
NOTE: The std OEM crank girdle can be used with the RB32 crank setup.
Note: Clearancing of the cylinder block is sometimes required.
More Information
Product Name
Spool RB32 3.2L Stroker Kit with Custom CP Pistons
Brands
Spool
Engine
RB30DET (DOHC), RB30ET (SOHC), RB32 Stroker
Make
Holden, Nissan
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Kits usually include pistons, rings, rods, bearings and related hardware depending on the engine family. Check the listing for exact inclusions.
Do I still need machining with a full engine kit?
Yes. The block must be honed and all clearances checked and set by your builder. Assembly should only occur after full measurement and verification.
What is the recommended bore clearance for the CP pistons in the RB32 Stroker Kit?
The recommended bore clearance for the CP pistons is typically around 0.0020" to 0.0025". However, this can vary based on your specific engine build and intended use, so it's essential to consult with your engine builder for the best results.
What is the compression ratio of the pistons included in the RB32 Stroker Kit?
The pistons included in the RB32 Stroker Kit have a compression ratio of 9.0:1. If you require a different compression ratio, custom pistons can be made for an additional fee and a lead time of 6-8 weeks.
Is line boring necessary after installing the RB32 crankshaft and connecting rods?
Line boring is not typically required for the RB32 crankshaft and connecting rods if the OEM main caps are used and installed correctly. However, it is advised to check alignment and clearances to ensure optimal performance.
Can I use the standard OEM crank girdle with the RB32 Stroker Kit?
Yes, the standard OEM crank girdle can be used with the RB32 crank setup. Ensure that it is in good condition and properly fitted to maintain engine stability.
What type of ARP bolts are included with the connecting rods in this kit?
The connecting rods in the RB32 Stroker Kit come standard with ARP2000 bolts. You also have the option to upgrade to L19 bolts for enhanced strength and reliability.
