Chevy LS2 Dish -27.5cc All std 15 deg/ L92 4.030 bore, 4.000 stroke, 6.125 rod 9.0 to 1 Comp with 64cc head (CP Bullets BLS1006-030)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Chevrolet |
|
Engine Type |
LS Series |
|
Part Number |
BLS1006-030 |
|
Bore (in) |
4.03 |
|
Stroke (in) |
4 |
|
Rod Length (in) |
6.125 |
|
Comp Height |
1.11 |
|
Head Type |
Std 15 deg/ L92 |
|
Head CC |
64 |
|
Dome / Dish Height |
-0.188 |
|
Dom/Dish CC |
-27.5 |
|
Compression Ratio |
9 |
|
Pin |
.927 x 2.250 |
|
Ring Thickness |
1.5 x 1.5 x 3.0mm |
|
VR Depth |
-.200 / -.155 |
|
Cubic Inch |
408 |
|
Piston Weight |
413 |
|
Style |
Dish |
|
Valve Reliefs |
2 VR's |
|
Gas Port |
No |
| Product Name | Chevy LS2 Dish -27.5cc All std 15 deg/ L92 4.030 bore, 4.000 stroke, 6.125 rod 9.0 to 1 Comp with 64cc head (CP Bullets BLS1006-030) |
|---|---|
| Brands | CP Carrillo |
| Engine | GM / LS |
| Make | Chevrolet, GM, Holden, LS Chev |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended compression ratio for the BLS1006-030 pistons?
The BLS1006-030 pistons are designed for a compression ratio of 9.0:1 when used with a 64cc head. Ensure that your engine's specifications align with this setup for optimal performance.
What are the specific bore and stroke dimensions for the BLS1006-030 pistons?
These pistons are designed for a 4.030-inch bore and a 4.000-inch stroke. It's crucial to verify that your engine block is machined to these specifications for proper fitment.
What is the weight of the BLS1006-030 pistons?
The BLS1006-030 pistons weigh 413 grams each. This weight should be considered when balancing your rotating assembly to maintain engine performance and reliability.
Do the BLS1006-030 pistons have valve reliefs?
Yes, the BLS1006-030 pistons feature two valve reliefs. This design is essential for clearance with the LS engine's valves, especially at higher RPMs.
What is the dish volume of the BLS1006-030 pistons?
The dish volume for the BLS1006-030 pistons is -27.5cc. This contributes to the overall compression ratio and should be factored into your engine's calculations.
-
-
-
-
-
-
-
-
-
-
GM High pressure pump Kit with both O rings and PUG001 GirdleSpecial Price AUD$222.73 Regular Price AUD$225.45 -
