Chevy LS 5.3L Flat top -2.7cc All std 15 deg/ L92 3.905 bore, 3.622 stroke, 6.095 rod 10.6 to 1 Comp with 61.2cc head (CP Bullets BLS1124-125)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Chevrolet |
|
Engine Type |
LS Series |
|
Part Number |
BLS1124-125 |
|
Bore (in) |
3.905 |
|
Stroke (in) |
3.622 |
|
Rod Length (in) |
6.095 |
|
Comp Height |
1.337 |
|
Head Type |
Std 15 deg/ L92 |
|
Head CC |
62 |
|
Dome / Dish Height |
FT |
|
Dom/Dish CC |
-2.7 |
|
Compression Ratio |
10.6 |
|
Pin |
.945 x 2.250 |
|
Ring Thickness |
1.5 x 1.5 x 3.0mm |
|
VR Depth |
-.180 / -.130 |
|
Cubic Inch |
347 |
|
Piston Weight |
410 |
|
Style |
FT |
|
Valve Reliefs |
2 VR's |
|
Gas Port |
No |
| Product Name | Chevy LS 5.3L Flat top -2.7cc All std 15 deg/ L92 3.905 bore, 3.622 stroke, 6.095 rod 10.6 to 1 Comp with 61.2cc head (CP Bullets BLS1124-125) |
|---|---|
| Brands | CP Carrillo |
| Engine | GM / LS |
| Make | Chevrolet, GM, Holden, LS Chev |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore size for the BLS1124-125 pistons?
The BLS1124-125 pistons are designed for a bore size of 3.905 inches. Ensure that your engine block is machined to this specification for optimal fitment.
What compression ratio do the BLS1124-125 pistons achieve with a 62cc head?
These pistons achieve a compression ratio of 10.6:1 when used with a 62cc cylinder head. This ratio is suitable for performance applications, but ensure proper tuning and fuel quality for reliability.
What is the weight of the BLS1124-125 pistons?
Each BLS1124-125 piston weighs 410 grams. When building your engine, consider the overall rotating assembly weight for balance and performance.
Do the BLS1124-125 pistons have valve reliefs?
Yes, the BLS1124-125 pistons feature two valve reliefs, which are necessary for clearance with the LS engine's valves. Ensure your camshaft profile is compatible to avoid interference.
What is the pin size for the BLS1124-125 pistons?
The BLS1124-125 pistons use a pin size of .945 inches by 2.250 inches. Make sure your connecting rods are compatible with this pin size for proper assembly.
