AUDI TFSI 2480cc 5cyl TTRS RS3, ACL Race Series Main Bearings (6M5563H)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
AUDI TFSI 2480cc 5cyl TTRS RS3, ACL Race Series Main Bearings (6M5563H)
Enhance your engine's performance with the ACL Race Series Main Bearings, specifically designed for the AUDI TFSI 2480cc 5cyl TTRS RS3. These bearings are engineered to withstand higher RPM conditions, making them ideal for high-performance applications. Crafted with precision, they ensure durability and reliability under extreme conditions.
- High strength overlay plate with reduced thickness for superior performance
- Hardened steel backs on all Conrod Bearings for enhanced durability
- Increased crush and elimination of flash plating for improved fit
- 3/4 grooving on Main Bearings for optimum oil supply
- Tight consistent wall tolerances for precision fit
- Oversize chamfers where applicable for better oil flow
| Product Name | AUDI TFSI 2480cc 5cyl TTRS RS3, ACL Race Series Main Bearings (6M5563H) |
|---|---|
| Brands | ACL |
| Engine | TFSI |
| Make | VW |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What are the key features of the ACL Race Series Main Bearings for the AUDI TFSI 2480cc engine?
The ACL Race Series Main Bearings for the AUDI TFSI 2480cc engine feature a high strength overlay plate with reduced thickness for enhanced performance, hardened steel backs for durability, and increased crush to improve fit. They also have 3/4 grooving for optimal oil supply and tight wall tolerances for precision fitting.
Do I need to modify my engine block to fit these main bearings?
Typically, these main bearings should fit without modification if your engine block is in good condition and properly machined. However, always check for proper clearances and ensure the block is line-bored if necessary to accommodate the new bearings.
What RPM range are these main bearings suitable for?
The ACL Race Series Main Bearings are designed for high-performance applications and can withstand higher RPM conditions. However, the actual RPM limit will depend on your overall engine build, tuning, and oiling system, so ensure all components are compatible and properly set up.
What type of oil should I use with these main bearings?
It is recommended to use high-quality synthetic oil that meets or exceeds the specifications for your AUDI TFSI engine. This will help ensure optimal lubrication and performance, especially under high-stress conditions.
Are these main bearings suitable for both street and race applications?
Yes, while the ACL Race Series Main Bearings are specifically designed for high-performance and race applications, they can also be used in street applications if the engine is built for higher performance. Ensure that the overall build quality and tuning are appropriate for your intended use.
-
Turbosmart BOV Kompact EM DualPort- VR1 (VW/Audi/Seat/Skoda TFSI)Special Price AUD$347.27 Regular Price AUD$381.82 -
Turbosmart BOV Kompact EM PlumBack- VR1 (VW/Audi/Seat/Skoda TFSI)Special Price AUD$318.18 Regular Price AUD$350.00
