PULSAR Billet S480 Turbo with 96mm Turbine wheel

For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
- 7+7 blade 80mm x 113mm billet compressor wheel with extended tip technology, optimized for maximum aerodynamics.
- S400 96mm x 88mm Inconel 713 turbine wheel, designed for high-temperature operation.
- T6 divided turbine housings available in 1.32 A/R or 1.58 A/R, featuring a 5" V-band outlet and a 5.75" OD Marmon flange.
- T4 divided turbine housing options in 1.25 A/R or 1.10 A/R.
- Compressor flow rated at 120 lb/min, supporting horsepower capabilities from 750 to 1400 HP.
Specifications:
- Compressor Wheel: 80mm x 113mm
- Turbine Wheel: 96mm x 88mm or 83mm x 74mm
- Compressor Inlet: 5†Hose
- Compressor Outlet: V-Band
- Turbine Inlet: T6 or T4
- Turbine Outlet: 5.75†Marmon (T6) or 4†V-Band (T4)
- Oil Feed: 1/4†NPT
- Oil Drain: Standard T6 drain flange
- Note: Outlet flange and clamp are not included
| Product Name | PULSAR Billet S480 Turbo with 96mm Turbine wheel |
|---|---|
| Brands | Pulsar |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
How do I choose the right turbo size?
Turbo selection depends on engine size, boost target, rpm range and desired response. A smaller turbo spools faster; a larger turbo supports more top-end power.
Why is wastegate placement important?
Poor placement or sizing can cause boost creep or unstable boost control.
What are the benefits of the 7+7 blade design on the Pulsar Billet S480 Turbo?
The 7+7 blade design on the 80mm x 113mm billet compressor wheel enhances aerodynamic efficiency, allowing for improved airflow and reduced turbulence. This results in quicker spool times and better overall performance, making it suitable for high horsepower applications.
What are the recommended turbine housing A/R ratios for the Pulsar S480 Turbo?
The Pulsar S480 Turbo offers T6 divided turbine housings in 1.32 A/R or 1.58 A/R, and T4 divided options in 1.25 A/R or 1.10 A/R. The choice of A/R affects boost response and power delivery, so select based on your engine's specific tuning and performance goals.
What is the maximum horsepower capability of the Pulsar Billet S480 Turbo?
The Pulsar Billet S480 Turbo is compressor flow rated at 120 lb/min, supporting horsepower capabilities typically ranging from 750 to 1400 HP. However, actual performance will depend on factors such as engine setup, tuning, and fuel quality.
What type of oil feed and drain connections are required for the Pulsar S480 Turbo?
The Pulsar S480 Turbo requires a 1/4” NPT oil feed connection and features a standard T6 drain flange for oil return. Ensure proper oil supply and drainage to maintain turbo longevity and performance.
Are any additional components required for installation of the Pulsar S480 Turbo?
Yes, the outlet flange and clamp are not included with the Pulsar S480 Turbo. Ensure you source compatible components for your specific setup to facilitate proper installation and secure connections.