PULSAR 7975G COMPACT 1450HP 79mm Dual Ball Bearing Turbo
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
PULSAR 7975G COMPACT 1450HP 79mm Dual Ball Bearing Turbo
DESCRIPTION:
- Dual ceramic ball bearing system provides optimal turbo response &
better durability by reducing the shaft-motion - 10 Blade G-Aero billet compressor wheel with extended tapered tip technology
- 9 Blade G-Aero Inconel 713c turbine wheel
- Anti-Surge ported-shroud compressor inlet, cover integrated with the speed sensor port
- 8 Options in Turbine Housing
- Installation Hardware: 3” flange kit for Comp. Outlet, T4 Gasket/3” flange kit for Turbo. Inlet, 3.5”/4” flange kit for Turbo. Outlet and oil Drain Fitting kit are included by default
- Oil Feed Fitting needs to be bought separately
- Compressor Wheel: 79*98mm
- Turbine Wheel: 82*75mm
- Compressor Inlet: 4″ Hose
- Compressor Outlet: 3″ hose
- Water Ports: -6AN
- Oil Feed: Flange Required
- Oil Drain: -12AN(O-Ring sealed Flange Kit Incl’)
- Comes with Inlet flange and clamp (DVB) and Outlet flange and clamp
-
Turbine housing option:
- T4(Divided) inlet, Vband outlet (fits 4″ OD tubing), 1.01 A/R
- T4(Open) inlet, Vband outlet (fits 3.5″ OD tubing), 1.15 A/R
- T4(Divided) inlet, Vband outlet (fits 4″ OD tubing), 0.95A/R
- T4(Divided) inlet, Vband outlet (fits 3.5″ OD tubing), 1.15 A/R
- T4(Divided) inlet, Vband outlet (fits 4″ OD tubing), 1.28 A/R
- Vband inlet (fits 3″ OD tubing) and Vband outlet (fits 3.5″ OD tubing), 1.01 A/R
- Vband inlet (fits 3″ OD tubing) and Vband outlet (fits 3.5″ OD tubing), 1.15 A/R
- Vband inlet (fits 3″ OD tubing) and Vband outlet (fits 3.5″ OD tubing), 1.28 A/R
| Product Name | PULSAR 7975G COMPACT 1450HP 79mm Dual Ball Bearing Turbo |
|---|---|
| Brands | Pulsar |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
How do I choose the right turbo size?
Turbo selection depends on engine size, boost target, rpm range and desired response. A smaller turbo spools faster; a larger turbo supports more top-end power.
Why is wastegate placement important?
Poor placement or sizing can cause boost creep or unstable boost control.
What is the maximum horsepower rating for the Pulsar 7975G turbo?
The Pulsar 7975G turbo is rated for up to 1450 horsepower. However, actual performance will depend on your engine setup, tuning, and supporting modifications.
What oil feed and drain specifications are required for this turbo?
The Pulsar 7975G requires a -4AN oil feed with a standard T4 flange (non-restricted) and a -12AN oil drain. Ensure proper sealing with the included O-ring flange kit.
What are the compressor and turbine wheel sizes for the Pulsar 7975G?
The compressor wheel measures 79mm in diameter with a 98mm inducer, while the turbine wheel is 82mm with a 75mm inducer. These sizes contribute to the turbo's performance characteristics.
What type of bearing system does the Pulsar 7975G use?
The Pulsar 7975G features a dual ceramic ball bearing system, which enhances turbo response and durability by reducing shaft motion.
What are the inlet and outlet specifications for this turbo?
The compressor inlet is designed for a 5-inch hose, while both the compressor and turbine outlets use a 3-inch V-band connection. Ensure your piping matches these specifications for optimal fitment.
-
-
-
Optima Battery 34 Red Top High Performance Start 12V AGM 800 CCASpecial Price AUD$340.00 Regular Price AUD$463.64 -
-
Bowden's Own Big Green Sucker Drying Towel 700 x 400mmSpecial Price AUD$38.18 Regular Price AUD$40.00 -
-
