NISSAN TD25 TD27 ZD30 QD32, ACL Race Series Conrod Bearings (4B2966H)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
ACL Race Series Conrod Bearings for NISSAN TD25 TD27 ZD30 QD32
Upgrade your engine's performance with the ACL Race Series Conrod Bearings, specifically designed for NISSAN TD25, TD27, ZD30, and QD32 engines. These high-performance bearings are engineered to endure higher RPM conditions, making them ideal for racing and high-stress applications. Crafted with precision, they ensure durability and reliability for your vehicle.
- High Strength Overlay Plate: Features a reduced thickness for enhanced performance.
- Hardened Steel Backs: Provides robust support for all conrod bearings.
- Increased Crush: Eliminates flash plating for a superior fit.
- 3/4 Grooving on Main Bearings: Ensures optimal oil supply for efficient lubrication.
- Tight Wall Tolerances: Guarantees consistent performance and reliability.
- Oversize Chamfers: Available where applicable for improved fitment.
Explore the full range of ACL Race Series Engine Bearings at ACL Performance and enhance your engine's capabilities today.
| Product Name | NISSAN TD25 TD27 ZD30 QD32, ACL Race Series Conrod Bearings (4B2966H) |
|---|---|
| Brands | ACL |
| Engine | TD25 / TD27 |
| Make | Nissan |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What are the benefits of using ACL Race Series Conrod Bearings in my TD25 or TD27 engine?
ACL Race Series Conrod Bearings are designed for high-performance applications, providing enhanced durability and reliability under increased RPM conditions. Their high strength overlay plate and hardened steel backs ensure they can withstand the demands of racing and high-stress environments, making them ideal for performance builds.
Do I need to modify my engine for these conrod bearings?
While the ACL Race Series Conrod Bearings are designed to fit TD25 and TD27 engines, it's important to check for proper fitment and clearances. Depending on your engine's condition and previous modifications, you may need to ensure that the conrod journals are within spec and that the bearings are properly installed to avoid any issues.
What is the recommended installation procedure for these conrod bearings?
When installing ACL Race Series Conrod Bearings, ensure the conrod and crankshaft surfaces are clean and free of debris. Apply a suitable assembly lubricant to the bearings and journals before installation. It's also crucial to follow the correct torque specifications for your conrod bolts to ensure proper bearing crush and performance.
Can I use these bearings in a street application?
While ACL Race Series Conrod Bearings are primarily designed for racing and high-performance applications, they can be used in street applications if your engine is built for higher RPMs and stress. However, ensure that your engine is properly tuned and maintained to maximise the benefits of these performance bearings.
What should I check after installing ACL Race Series Conrod Bearings?
After installation, monitor oil pressure and check for any unusual noises during engine operation. It's also advisable to perform a break-in procedure if applicable, and regularly inspect the bearings for wear or damage, especially if the engine is subjected to high RPMs or heavy loads.