Ford 5.0L Gen 1 & 2 4V Coyote 3.640 Bore, 5.932 rod, 1.165 CH +5.06cc Dome 11.5 CR (CP Bullets BF9876-010)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
Ford 5.0L Gen 1 & 2 4V Coyote Pistons - CP Carrillo BF9876-010
Upgrade your Ford 5.0L Gen 1 & 2 4V Coyote engine with the high-performance CP Carrillo BF9876-010 pistons. Designed for enthusiasts seeking enhanced power and reliability, these pistons offer superior performance and durability. Perfect for both street and track applications, they ensure optimal engine efficiency and longevity.
- Bore Size: 3.640 inches
- Rod Length: 5.932 inches
- Compression Height: 1.165 inches
- Dome Volume: +5.06cc
- Compression Ratio: 11.5:1
- Compatibility: Ford 5.0L Gen 1 & 2 4V Coyote engines
- Application: Ideal for high-performance builds
These CP Carrillo pistons are engineered to deliver exceptional strength and performance, making them a top choice for serious car enthusiasts. Enhance your engine's capabilities and experience the difference in power and efficiency.
| Product Name | Ford 5.0L Gen 1 & 2 4V Coyote 3.640 Bore, 5.932 rod, 1.165 CH +5.06cc Dome 11.5 CR (CP Bullets BF9876-010) |
|---|---|
| Brands | CP Carrillo |
| Engine | Coyote 5.0L V8 |
| Make | Ford |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the CP Carrillo BF9876-010 pistons?
For the CP Carrillo BF9876-010 pistons, a typical bore clearance of 0.0030" to 0.0035" is recommended. However, always consult with your engine builder for specific requirements based on your application and intended use.
What type of fuel is suitable for the 11.5:1 compression ratio of these pistons?
The 11.5:1 compression ratio of the BF9876-010 pistons typically requires premium fuel with an octane rating of 98 RON or higher to prevent knocking and ensure optimal performance. Always consider your tuning setup and boost levels when selecting fuel.
Do these pistons require any specific machining before installation?
Yes, the CP Carrillo BF9876-010 pistons may require specific machining such as honing of the cylinder bores to achieve the correct clearance. Ensure that your engine builder checks the bore size and prepares the engine accordingly for proper fitment.
What is the maximum RPM these pistons can handle?
While the CP Carrillo BF9876-010 pistons are designed for high-performance applications, the maximum RPM they can handle will depend on the entire engine build, including rod and crankshaft specifications. It's essential to consult with your engine builder to determine safe RPM limits based on your setup.
Are these pistons suitable for forced induction applications?
Yes, the BF9876-010 pistons can be used in forced induction applications, but careful attention must be paid to tuning, fuel quality, and boost levels. Ensure that your engine is built to handle the additional stress and that all components are compatible with your intended power goals.
