Ford 5.0L Gen 1 & 2 4V Coyote 3.630 Bore, 5.932 rod, 1.165 CH +5.06cc Dome 11.5 CR (CP Bullets BF9876-STD)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
Ford 5.0L Gen 1 & 2 4V Coyote 3.630 Bore, 5.932 Rod, 1.165 CH +5.06cc Dome 11.5 CR (CP Carrillo BF9876-STD)
Enhance your Ford 5.0L Gen 1 & 2 4V Coyote engine with the precision-engineered CP Carrillo BF9876-STD pistons. Designed for performance enthusiasts, these pistons offer superior durability and efficiency, ensuring your engine runs at its peak. With a 3.630 bore and a 5.932 rod, these pistons are crafted to deliver optimal compression and power.
- High-Performance Design: Engineered for the Ford 5.0L Gen 1 & 2 4V Coyote engines.
- Precision Fit: Features a 3.630 bore and 5.932 rod for perfect compatibility.
- Enhanced Compression: 1.165 CH with a +5.06cc dome for an 11.5 CR, boosting engine performance.
- Durable Construction: Built to withstand high pressure and temperature conditions.
- Optimized Performance: Increases horsepower and torque for a more powerful drive.
Upgrade your engine with the CP Carrillo BF9876-STD pistons and experience the difference in performance and reliability. Perfect for those seeking to maximize their vehicle's potential.
| Product Name | Ford 5.0L Gen 1 & 2 4V Coyote 3.630 Bore, 5.932 rod, 1.165 CH +5.06cc Dome 11.5 CR (CP Bullets BF9876-STD) |
|---|---|
| Brands | CP Carrillo |
| Engine | Coyote 5.0L V8 |
| Make | Ford |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore and rod length for the BF9876-STD pistons?
The BF9876-STD pistons are designed for a 3.630 inch bore and a 5.932 inch rod length, specifically tailored for the Ford 5.0L Gen 1 & 2 4V Coyote engines.
What compression ratio do the BF9876-STD pistons achieve?
These pistons feature a compression height of 1.165 inches and a +5.06cc dome, resulting in an 11.5:1 compression ratio, which enhances engine performance.
What are the machining requirements for installing the BF9876-STD pistons?
When installing the BF9876-STD pistons, ensure that the cylinder bore is properly honed to the specified 3.630 inch size, and confirm that ring gaps are set according to your engine's intended use and boost levels.
Can the BF9876-STD pistons handle high-performance applications?
Yes, the BF9876-STD pistons are constructed for high-performance applications, designed to withstand elevated pressure and temperature conditions typical in modified Coyote engines.
What is the expected delivery time for the BF9876-STD pistons?
These pistons are not held in stock in Australia, so please allow an additional 2 weeks for delivery when ordering the BF9876-STD.
