BH57-1075-020 Gen3 Dodge Hemi 3.937" bore, 4.080" stroke, 6.125" rod, .866" pin. '03-'08 5.7L head, +5cc, 10.75:1 comp. (CP Bullets BH57-1075-020)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Dodge |
|
Engine Type |
Hemi |
|
Part Number |
BH57-1075-020 |
|
Bore (in) |
3.937 |
|
Stroke (in) |
4.08 |
|
Rod Length (in) |
6.125 |
|
Comp Height |
1.1 |
|
Head Type |
5.7 Hemi |
|
Head CC |
85 |
|
Dome / Dish Height |
0.051 |
|
Dom/Dish CC |
5 |
|
Compression Ratio |
10.75 |
|
Pin |
.866 x 2.250 |
|
Ring Thickness |
1.5 x 1.5 x 3.0mm |
|
VR Depth |
-.160 / -.060 |
|
Cubic Inch |
397 |
|
Piston Weight |
436 |
|
Style |
Dome |
|
Valve Reliefs |
2 VR's |
|
Gas Port |
No |
| Product Name | BH57-1075-020 Gen3 Dodge Hemi 3.937" bore, 4.080" stroke, 6.125" rod, .866" pin. '03-'08 5.7L head, +5cc, 10.75:1 comp. (CP Bullets BH57-1075-020) |
|---|---|
| Brands | CP Carrillo |
| Engine | Hemi V8 |
| Make | Dodge |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended compression ratio for the BH57-1075-020 pistons?
The BH57-1075-020 pistons provide a compression ratio of 10.75:1 when used with the '03-'08 5.7L Hemi heads. Ensure your engine is tuned appropriately to handle this compression level.
What are the specific machining requirements for the BH57-1075-020 pistons?
When installing the BH57-1075-020 pistons, ensure that the bore clearance is set correctly according to your engine's specifications. Additionally, check that the ring gaps are set by the engine builder for optimal performance.
What is the weight of the BH57-1075-020 pistons?
The BH57-1075-020 pistons weigh 436 grams each. This weight should be considered when balancing the rotating assembly for your engine build.
Do the BH57-1075-020 pistons have valve reliefs?
Yes, the BH57-1075-020 pistons feature two valve reliefs, which are essential for clearance in high-performance applications. Ensure that your camshaft profile is compatible with these reliefs.
What is the pin size for the BH57-1075-020 pistons?
The BH57-1075-020 pistons use a pin size of .866 inches by 2.250 inches. Make sure your conrods are compatible with this pin size for proper fitment.
