Small Block Ford Flat Top -8.7cc All 20 deg. TFS Twsited 4.005 bore, 3.400 stroke, 5.400 rod 60cc head 9.7 to 1 comp (CP Bullets BF6010-005)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Ford |
|
Engine Type |
Small Block |
|
Part Number |
BF6010-005 |
|
Bore (in) |
4.005 |
|
Stroke (in) |
3.4 |
|
Rod Length (in) |
5.4 |
|
Comp Height |
1.09 |
|
Head Type |
STD/ TFS Twisted |
|
Head CC |
60 |
|
Dome / Dish Height |
FT |
|
Dom/Dish CC |
-8.7 |
|
Compression Ratio |
9.7 |
|
Pin |
.927 x 2.500 |
|
Ring Thickness |
1.5 x 1.5 x 3.0mm |
|
VR Depth |
-.280 / SP |
|
Cubic Inch |
343 |
|
Piston Weight |
410 |
|
Style |
FT |
|
Valve Reliefs |
3 VR's |
|
Gas Port |
No |
| Product Name | Small Block Ford Flat Top -8.7cc All 20 deg. TFS Twsited 4.005 bore, 3.400 stroke, 5.400 rod 60cc head 9.7 to 1 comp (CP Bullets BF6010-005) |
|---|---|
| Brands | CP Carrillo |
| Engine | Ford V8 |
| Make | Ford |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the BF6010-005 pistons?
For the BF6010-005 pistons, a typical bore clearance of 0.0030" to 0.0035" is recommended. However, final clearance should be determined by the engine builder based on specific application and tolerances.
What compression ratio can I expect with the BF6010-005 pistons in my Small Block Ford?
The BF6010-005 pistons provide a compression ratio of 9.7:1 when used with a 60cc cylinder head. Ensure that all components are compatible and properly machined to achieve this ratio.
Do I need to modify my cylinder heads to use the BF6010-005 pistons?
The BF6010-005 pistons feature three valve reliefs, which should accommodate most standard TFS Twisted heads without modification. However, it's essential to check for clearance during assembly, especially with high-lift camshafts.
What is the weight of the BF6010-005 pistons, and how does it affect engine balance?
The BF6010-005 pistons weigh 410 grams each. It's crucial to balance the entire rotating assembly, including these pistons, to ensure smooth operation and reliability at higher RPMs.
What type of rings are included with the BF6010-005 pistons?
The BF6010-005 pistons come with 1.5mm x 1.5mm x 3.0mm rings. Ensure that the ring gaps are set according to your specific application for optimal performance and longevity.
