Small Block Ford Flat Top -8.7cc All 20 deg. TFS Twsited 4.125 bore, 3.400 stroke, 5.400 rod 60cc head 9.9 to 1 comp (CP Bullets BF6110-STD)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Ford |
|
Engine Type |
Small Block |
|
Part Number |
BF6110-STD |
|
Bore (in) |
4.125 |
|
Stroke (in) |
3.4 |
|
Rod Length (in) |
5.4 |
|
Comp Height |
1.09 |
|
Head Type |
STD/ TFS Twisted |
|
Head CC |
60 |
|
Dome / Dish Height |
FT |
|
Dom/Dish CC |
-8.7 |
|
Compression Ratio |
9.8 |
|
Pin |
.927 x 2.500 |
|
Ring Thickness |
1.5 x 1.5 x 3.0mm |
|
VR Depth |
-.280 / SP |
|
Cubic Inch |
364 |
|
Piston Weight |
459 |
|
Style |
FT |
|
Valve Reliefs |
3 VR's |
|
Gas Port |
No |
| Product Name | Small Block Ford Flat Top -8.7cc All 20 deg. TFS Twsited 4.125 bore, 3.400 stroke, 5.400 rod 60cc head 9.9 to 1 comp (CP Bullets BF6110-STD) |
|---|---|
| Brands | CP Carrillo |
| Engine | Ford V8 |
| Make | Ford |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended compression ratio for the BF6110-STD pistons?
The BF6110-STD pistons are designed to achieve a compression ratio of approximately 9.8 to 1 when used with a 60cc TFS Twisted head. Ensure that your engine's specific setup aligns with this ratio for optimal performance.
What are the specific machining requirements for the BF6110-STD pistons?
When installing the BF6110-STD pistons, ensure that the bore clearance is set correctly according to your engine's specifications. Additionally, check that the ring gaps are tailored to your engine's performance goals and operating conditions.
What is the pin size for the BF6110-STD pistons?
The BF6110-STD pistons feature a pin size of .927 inches with a length of 2.500 inches. Ensure compatibility with your conrods when selecting components.
What is the weight of the BF6110-STD pistons and how does it affect engine performance?
The BF6110-STD pistons weigh 459 grams. This weight can influence engine balance and responsiveness, so consider it when designing your rotating assembly for performance applications.
Do the BF6110-STD pistons require any specific installation techniques?
While installing the BF6110-STD pistons, ensure that they are properly oriented with the valve reliefs aligned with the cylinder head. Follow standard piston installation practices, including the use of appropriate lubricants and tools to avoid damage.
