Small Block Ford Dish -14.4cc All 20 deg. TFS Twisted 4.030 bore, 4.000 stroke, 6.200 rod 60cc head 10.7 to 1 comp (CP Bullets BF6063-030)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Ford |
|
Engine Type |
Small Block |
|
Part Number |
BF6063-030 |
|
Bore (in) |
4.03 |
|
Stroke (in) |
4 |
|
Rod Length (in) |
6.2 |
|
Comp Height |
1.29 |
|
Head Type |
STD/ TFS Twisted |
|
Head CC |
60 |
|
Dome / Dish Height |
-0.06 |
|
Dom/Dish CC |
-14.4 |
|
Compression Ratio |
10.7 |
|
Pin |
.927 x 2.500 |
|
Ring Thickness |
1.5 x 1.5 x 3.0mm |
|
VR Depth |
-.280 / SP |
|
Cubic Inch |
408 |
|
Piston Weight |
460 |
|
Style |
Dish |
|
Valve Reliefs |
3 VR's |
|
Gas Port |
No |
| Product Name | Small Block Ford Dish -14.4cc All 20 deg. TFS Twisted 4.030 bore, 4.000 stroke, 6.200 rod 60cc head 10.7 to 1 comp (CP Bullets BF6063-030) |
|---|---|
| Brands | CP Carrillo |
| Engine | Ford V8 |
| Make | Ford |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended compression ratio for the BF6063-030 pistons?
The BF6063-030 pistons are designed to achieve a compression ratio of 10.7:1 when used with a 60cc TFS Twisted head. Ensure that your engine's specifications align with this setup for optimal performance.
What is the piston weight of the BF6063-030, and how does it affect engine performance?
The BF6063-030 pistons weigh 460 grams. Lighter pistons can improve engine response and reduce reciprocating mass, but ensure that your rotating assembly is balanced to maintain reliability at higher RPMs.
What are the valve relief specifications for the BF6063-030 pistons?
The BF6063-030 pistons feature three valve reliefs. This design helps accommodate larger camshaft profiles and ensures proper clearance with the valves during operation.
What is the dome/dish height for the BF6063-030 pistons?
The BF6063-030 pistons have a dish height of -0.06 inches, which contributes to the overall compression ratio and combustion characteristics. Ensure proper matching with your cylinder head for optimal performance.
What type of pin is used in the BF6063-030 pistons?
The BF6063-030 pistons use a .927 x 2.500 inch pin. Ensure that your connecting rods are compatible with this pin size for proper fitment and performance.
