SBC 363ci Brodix ASCS, Bore 4.035, CH 1.225, Stroke 3.550, Rod 6.000, CR 13.8, Dome Head 62cc - Lefts & Rights (CP Pistons S1369B)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Chevrolet |
|
Engine Type |
SBC 360 Sprint - Dome, Brodix ASCS Head |
|
Part Number |
S1369B |
|
Bore (in) |
4.035 |
|
Stroke (in) |
3.55 |
|
Rod Length (in) |
6 |
|
Comp Height |
1.225 |
|
Dome / Dish Height |
0.53 |
|
Dom/Dish CC |
13.95 |
|
Pin |
.927 x 2.750 |
|
Ring Thickness |
.043 x .043 x 3.0mm |
|
VR Depth Int/Exh |
-.335 / SP |
|
Piston Weight |
492 |
|
Gas Port |
Yes |
|
Capacity |
363 |
|
Shlef (RPO) or Made to Order (MTO) |
ROP |
Designed for Brodix Spec head; lightweight hollow dome with right and left hand forging; Designed for back-cut rings; Pin-fitting included at no cost; Chamfered pins, Rings and wire locks included; Custom skirt cam and barrel shapes; Gas Ports; Accumulator included; Balanced to +/- 1 gram; Fully CNC machined; Pick lock grooves for easy lock removal. Notes:C - .010 Deck Clearance with 3.480 Stroke,
| Product Name | SBC 363ci Brodix ASCS, Bore 4.035, CH 1.225, Stroke 3.550, Rod 6.000, CR 13.8, Dome Head 62cc - Lefts & Rights (CP Pistons S1369B) |
|---|---|
| Brands | CP Carrillo |
| Engine | Chev |
| Make | GM |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended compression ratio for the SBC 363ci Brodix ASCS pistons?
The S1369B pistons are designed for a compression ratio of 13.8:1 when used with a suitable cylinder head and combustion chamber volume. Ensure that the head gasket and chamber specifications are compatible to achieve this ratio.
What are the specific machining requirements for the S1369B pistons?
These pistons may require careful fitting to the bore, including proper clearance and ring gap settings. It's crucial to hone the cylinder bores to the correct size and ensure the ring gaps are set according to your specific application and RPM range.
Can I use these pistons with any SBC 360 engine?
The S1369B pistons are specifically designed for the SBC 360 Sprint engine with Brodix ASCS heads. Ensure compatibility with your engine's specifications, particularly regarding bore size and stroke, to maintain performance and reliability.
What is the weight of the S1369B pistons and how does it affect performance?
The S1369B pistons weigh 492 grams each. Lightweight pistons can improve engine response and reduce reciprocating mass, but ensure that your engine's rotating assembly is balanced accordingly to maintain reliability at higher RPMs.
Do these pistons come with gas ports, and what is their purpose?
Yes, the S1369B pistons include gas ports. Gas ports help improve ring seal and reduce blow-by by allowing combustion gases to pressurise the ring grooves, enhancing performance, especially in high-performance applications.
