Dodge SB 6.2 Liter Hellcat SRT Bore 4.090 CH 1.280 Stroke 3.580 Rod 6.200 CR 9.5 Inverted Dome Head (CP Bullets BH62-950-STD)
Brands
CP Carrillo
Engine
Hemi V8
Make
Dodge
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What are the recommended bore and stroke specifications for the BH62-950-STD pistons?
The BH62-950-STD pistons are designed for a bore of 4.090 inches and a stroke of 3.583 inches, specifically tailored for the Dodge Hemi V8 engine.
What is the compression ratio of the BH62-950-STD pistons, and how does it affect performance?
The BH62-950-STD pistons have a compression ratio of 9.5:1. This ratio is suitable for a balance of performance and reliability, but optimal tuning and fuel quality are essential to achieve the best results.
What is the piston weight for the BH62-950-STD, and how does it influence engine dynamics?
The BH62-950-STD pistons weigh 493 grams. Lighter pistons can improve engine response and reduce load on the connecting rods, but it's important to ensure that the entire rotating assembly is balanced properly.
What type of valve reliefs do the BH62-950-STD pistons have?
The BH62-950-STD pistons feature two valve reliefs, which are designed to accommodate the specific valve timing and lift of the Hemi V8 engine, ensuring proper clearance during operation.
What is the pin size and length for the BH62-950-STD pistons?
The BH62-950-STD pistons use a pin size of .927 inches and a length of 2.250 inches. Ensure that the connecting rods are compatible with these specifications for proper fitment.
