CP Pistons 4G63 2G (7-Bolt)
CP Pistons 4G63 1G (6-Bolt)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
CP Pistons for 4G63 1G (6-Bolt) Engines
Available in:
88mm Stroke
- Bore: 85mm (STD) / Stroke: 88mm / Comp: 9.0:1 - Part#: SC7198
- Bore: 85.5mm (+0.5mm) / Stroke: 88mm / Comp: 9.0:1 - Part#: SC7200
- Bore: 86mm (+1mm) / Stroke: 88mm / Comp: 9.0:1 - Part#: SC7202
94mm Stroke
- Bore: 85mm (STD) / Stroke: 94mm / Comp: 9.0:1 - Part#: SC7212
- Bore: 85.5mm (+0.5mm) / Stroke: 94mm / Comp: 9.0:1 - Part#: SC7213
- Bore: 86mm (+1mm) / Stroke: 94m / Comp: 9.0:1 - Part#: SC7214
100mm Stroke
- Bore: 85mm (STD) / Stroke: 100mm / Comp: 9.0:1 - Part#: SC7196
- Bore: 85.5mm (+0.5mm) / Stroke: 100mm / Comp: 9.0:1 - Part#: SC7205
- Bore: 86mm (+1mm) / Stroke: 100mm / Comp: 9.0:1 - Part#: SC7207
| Product Name | CP Pistons 4G63 1G (6-Bolt) |
|---|---|
| Brands | CP Carrillo |
| Engine | 4G63 1G (6-Bolt) |
| Make | Mitsubishi |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore size for the CP Pistons 4G63 1G (6-Bolt)?
The CP Pistons for the 4G63 1G (6-Bolt) are available in three bore sizes: 85mm (STD), 85.5mm (+0.5mm), and 86mm (+1mm). Choose the bore size based on your engine's requirements and ensure proper machining for fitment.
What compression ratio do these pistons provide?
All variants of the CP Pistons for the 4G63 1G (6-Bolt) maintain a compression ratio of 9.0:1. This is suitable for a range of performance applications, but ensure your engine is tuned appropriately for optimal performance.
Can these pistons be used with different stroke lengths?
Yes, the CP Pistons for the 4G63 1G (6-Bolt) are available for multiple stroke lengths: 88mm, 94mm, and 100mm. Ensure that you select the correct piston part number that matches your desired stroke length and bore size.
What machining considerations should I keep in mind when installing these pistons?
When installing CP Pistons, it's crucial to ensure the correct bore clearance is achieved. Additionally, check ring gaps and ensure the piston-to-wall clearance is within specifications to prevent issues during operation.
Are these pistons suitable for high-performance applications?
Yes, CP Pistons are designed for performance applications, but reliability will depend on proper machining, clearances, tuning, and fuel quality. Ensure your engine is built to handle the expected power levels.
