Chevy 364ci ASCS 4.160 bore 1.335 CH +14cc 14.7:1 CR - Lefts & Rights (CP Bullets BCRE1365-035)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Chevrolet |
|
Engine Type |
Small Block |
|
Part Number |
BCRE1365-035 |
|
Bore (in) |
4.16 |
|
Stroke (in) |
3.335 |
|
Rod Length (in) |
6 |
|
Comp Height |
1.335 |
|
Head Type |
ASCS |
|
Head CC |
58 |
|
Dome / Dish Height |
0.5 |
|
Dom/Dish CC |
13.72 |
|
Compression Ratio |
14.7 |
|
Pin |
.927 x 2.250 |
|
Ring Thickness |
1.0 x 1.0 x 2.0mm |
|
VR Depth |
-.335 / SP |
|
Cubic Inch |
363 |
|
Piston Weight |
521 |
|
Style |
Dome |
|
Valve Reliefs |
2 VR's |
|
Gas Port |
Yes |
| Product Name | Chevy 364ci ASCS 4.160 bore 1.335 CH +14cc 14.7:1 CR - Lefts & Rights (CP Bullets BCRE1365-035) |
|---|---|
| Brands | CP Carrillo |
| Engine | Chev |
| Make | GM |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the BCRE1365-035 pistons?
For the BCRE1365-035 pistons, a typical bore clearance of 0.0035" to 0.0045" is recommended. However, always confirm with your engine builder based on specific application and tolerances.
What compression ratio can I expect with the BCRE1365-035 pistons?
The BCRE1365-035 pistons are designed to achieve a compression ratio of approximately 14.7:1 when used with a 58cc head. Ensure that your engine's overall setup supports this high compression for optimal performance.
What type of fuel is suitable for the BCRE1365-035 pistons?
Due to the high compression ratio of 14.7:1, it is advisable to use high-octane fuel to prevent detonation. Typically, race fuel or premium pump fuel with a minimum of 98 RON is recommended.
Do the BCRE1365-035 pistons require specific machining?
Yes, the BCRE1365-035 pistons may require specific machining such as proper bore sizing and ring gap setting. Always consult with your engine builder to ensure correct fitment and performance.
What is the weight of the BCRE1365-035 pistons and how does it affect performance?
The BCRE1365-035 pistons weigh 521 grams each. While this weight is suitable for performance applications, lighter pistons can improve engine response and reduce stress on the rotating assembly. Consider your specific application when evaluating piston weight.
