Chevy 363ci ASCS 4.060 Bore 1.250 CH 14cc Dome Vert Gas Ports - Lefts & Rights (CP Bullets BCRE1340-060)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Chevrolet |
|
Engine Type |
Small Block |
|
Part Number |
BCRE1340-060 |
|
Bore (in) |
4.06 |
|
Stroke (in) |
3.5 |
|
Rod Length (in) |
6 |
|
Comp Height |
1.25 |
|
Head Type |
ASCS |
|
Head CC |
58 |
|
Dome / Dish Height |
0.5 |
|
Dom/Dish CC |
14.1 |
|
Compression Ratio |
14.25 |
|
Pin |
.927 x 2.250 |
|
Ring Thickness |
1.0 x 1.0 x 2.0mm |
|
VR Depth |
-.335 / SP |
|
Cubic Inch |
362 |
|
Piston Weight |
483 |
|
Style |
Dome |
|
Valve Reliefs |
2 VR's |
|
Gas Port |
Yes |
| Product Name | Chevy 363ci ASCS 4.060 Bore 1.250 CH 14cc Dome Vert Gas Ports - Lefts & Rights (CP Bullets BCRE1340-060) |
|---|---|
| Brands | CP Carrillo |
| Engine | Chev |
| Make | GM |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the BCRE1340-060 pistons?
For the BCRE1340-060 pistons, a typical bore clearance of 0.0025" to 0.0030" is recommended. However, final clearance should be determined by the engine builder based on the specific application and operating conditions.
What compression ratio can I expect with the BCRE1340-060 pistons?
The BCRE1340-060 pistons provide a compression ratio of approximately 14.25:1 when used with a 58cc head. Ensure that your engine's setup, including fuel quality and tuning, can support this high compression.
Are there specific machining requirements for the BCRE1340-060 pistons?
Yes, the BCRE1340-060 pistons may require specific machining for the ring grooves and valve reliefs to ensure proper fitment and performance. Always consult with your engine builder for precise machining needs.
What type of fuel is recommended for engines using BCRE1340-060 pistons?
Engines using the BCRE1340-060 pistons should run on high-octane fuel, ideally 98 RON or higher, to prevent detonation due to the high compression ratio. Proper tuning is essential for optimal performance.
What is the weight of the BCRE1340-060 pistons and how does it affect performance?
The BCRE1340-060 pistons weigh 483 grams each. While this weight is typical for performance applications, consider the overall rotating assembly balance and the impact on engine response and RPM capabilities.
