Chevrolet SBC 360 Sprint - Dome, Brodix ASCS Head 356, Bore 4.125, CH 1.335, Stroke 3.335, Rod 6.000 - Lefts & Rights (CP Pistons S1365)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Chevrolet |
|
Engine Type |
SBC 360 Sprint - Dome, Brodix ASCS Head |
|
Part Number |
S1365 |
|
Bore (in) |
4.125 |
|
Stroke (in) |
3.335 |
|
Rod Length (in) |
6 |
|
Comp Height |
1.335 |
|
Dome / Dish Height |
0.55 |
|
Dom/Dish CC |
13.5 |
|
Pin |
.927 x 2.750 |
|
Ring Thickness |
1.2 x 1.2 x 3.0mm |
|
VR Depth Int/Exh |
-.330 / SP |
|
Piston Weight |
475 |
|
Gas Port |
Yes |
|
Capacity |
357 |
|
Shlef (RPO) or Made to Order (MTO) |
MTO |
Designed for Brodix Spec head; Super lightweight hollow dome with right and left hand forging; Designed for back-cut rings; Pin-fitting included at no cost; Chamfered pins and wire locks included; Custom skirt cam and barrel shapes; Gas Ports; Accumulator and anti-detonation grooves included; Balanced to +/- 1 gram; Fully CNC machined; Pick lock grooves for easy lock removal. Notes:C - .010 Deck Clearance with 3.480 Stroke, D - Rail Support included.
| Product Name | Chevrolet SBC 360 Sprint - Dome, Brodix ASCS Head 356, Bore 4.125, CH 1.335, Stroke 3.335, Rod 6.000 - Lefts & Rights (CP Pistons S1365) |
|---|---|
| Brands | CP Carrillo |
| Engine | Chev |
| Make | GM |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended deck clearance for the S1365 pistons?
The S1365 pistons are designed with a recommended deck clearance of .010 inches when used with a 3.480-inch stroke. Ensure this clearance is maintained for optimal performance.
What type of ring configuration do the S1365 pistons support?
The S1365 pistons are designed for back-cut rings, which can enhance sealing and reduce friction. Make sure to use compatible rings for best results.
What is the weight of the S1365 pistons and how does it affect performance?
The S1365 pistons weigh 475 grams. Their lightweight design contributes to reduced reciprocating mass, which can improve throttle response and overall engine performance.
Are gas ports included in the S1365 pistons and what is their purpose?
Yes, the S1365 pistons feature gas ports. These ports help improve ring seal by allowing combustion gases to pressurise the ring area, reducing blow-by and enhancing performance.
What machining considerations should be taken into account when using the S1365 pistons?
When using the S1365 pistons, ensure that the bore clearance is set correctly according to your engine's specifications. Additionally, verify that the piston pin fitting is done accurately, as it is included at no cost.
