Chevrolet 415ci 18° Dome, Bore 4.130, CH 1.062 - Lefts & Rights (CP Pistons S2151A)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
Chevrolet 415ci 18 Degree Dome Pistons - CP Pistons S2151A
Upgrade your engine's performance with the Chevrolet 415ci 18 Degree Dome Pistons, designed specifically for high-performance applications. These pistons are engineered by CP Pistons, a leader in the industry known for their precision and durability. Perfect for racing enthusiasts and professional builders, these pistons offer superior strength and reliability.
- Bore Size: 4.130 inches
- Compression Height (CH): 1.062 inches
- Design: 18-degree dome for optimized combustion
- Configuration: Includes both left and right pistons
- Material: High-quality aluminum alloy for enhanced durability
- Application: Ideal for Chevrolet 415ci engines
These pistons are crafted to withstand the rigors of high-speed racing, ensuring your engine performs at its peak. Whether you're building a new engine or upgrading an existing one, the CP Pistons S2151A is the perfect choice for achieving maximum horsepower and efficiency.
| Product Name | Chevrolet 415ci 18° Dome, Bore 4.130, CH 1.062 - Lefts & Rights (CP Pistons S2151A) |
|---|---|
| Brands | CP Carrillo |
| Engine | Chev |
| Make | GM |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the CP Pistons S2151A?
For the CP Pistons S2151A, a typical bore clearance of 0.0035" to 0.0040" is recommended. However, this can vary based on the specific application and operating conditions, so always consult with your engine builder for precise specifications.
What is the compression ratio when using the S2151A pistons in a Chevrolet 415ci engine?
The compression ratio will depend on the cylinder head design and gasket thickness. With the 18-degree dome design of the S2151A pistons, you can expect a higher compression ratio, which is beneficial for performance applications. It's crucial to calculate this based on your specific setup.
Are the S2151A pistons suitable for forced induction applications?
Yes, the S2151A pistons are designed to handle high-performance applications, including forced induction. However, ensure that the engine is properly tuned and that the boost levels are within safe limits to maintain reliability.
What type of rings should be used with the S2151A pistons?
For the S2151A pistons, it's recommended to use high-performance rings that can handle the demands of racing and high RPM applications. Ensure the rings are compatible with the piston design and are properly gapped for your specific engine setup.
What machining processes are necessary for installing the S2151A pistons?
When installing the S2151A pistons, you may need to perform bore honing to achieve the correct clearance. Additionally, ensure that the piston pin bores are checked for fitment. Always follow the manufacturer's guidelines for any further machining requirements.
