ARP 2000 RB25 Main Studs (202-5403)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
ARP 2000 RB25 Main Studs (202-5403) - Just Released!
Upgrade your engine's performance with the newly released ARP 2000 RB25 Main Studs (202-5403). Crafted from premium ARP 2000 material, these main studs boast an impressive tensile strength of 220,000 psi, surpassing the previous 8740 material kits rated at 190,000 psi. Designed for durability and precision, these studs are heat-treated before thread rolling and machining, ensuring optimal performance under extreme conditions.
- Material: Premium ARP 2000
- Tensile Strength: 220,000 psi
- Includes 12-point nuts for secure fastening
- Comes with hardened parallel washers for even load distribution
- Ensures accurate torque readings
Enhance your vehicle's reliability and performance with these top-of-the-line main studs, perfect for high-performance applications. Order now and experience the difference in quality and strength.
| Product Name | ARP 2000 RB25 Main Studs (202-5403) |
|---|---|
| Brands | ARP |
| Engine | RB25 |
| Make | Nissan |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What is the difference between ARP2000, L19 and CA625+?
ARP2000 suits most high-performance builds. L19 offers higher strength but is sensitive to handling and corrosion. CA625+ is used for extreme cylinder pressure or rpm.
Why is ARP lubricant important?
ARP torque values assume Ultra-Torque lubricant on threads and under the head. Without it, clamp load becomes unpredictable.
What are the torque specifications for the ARP 2000 RB25 main studs?
For the ARP 2000 RB25 main studs, use the recommended torque values provided by ARP. Typically, this will be around 75 ft-lb when using ARP Ultra-Torque lubricant. Always refer to ARP's latest instructions for the most accurate specifications.
Do I need to machine my engine block before installing the ARP 2000 main studs?
Yes, it's advisable to ensure that the main cap surfaces are properly aligned and that the block has been line-bored if necessary. This ensures that the studs will seat correctly and maintain proper torque settings.
Can I use the ARP 2000 main studs for a stock RB25 engine?
While the ARP 2000 main studs can be used on a stock RB25 engine, they are designed for high-performance applications. If you're planning on increasing power levels significantly, these studs will provide the added strength and reliability needed.
What additional components should I consider when installing ARP 2000 main studs?
When installing ARP 2000 main studs, consider using the included hardened parallel washers for even load distribution. It's also important to check the condition of the main caps and ensure proper lubrication during installation.
How do I ensure accurate torque readings with ARP 2000 main studs?
To ensure accurate torque readings, use ARP's Ultra-Torque lubricant on the threads and under the nut. This helps to reduce friction and allows for more consistent torque application, leading to better performance and reliability.
