Spool RB26 - RB28 2.8 L Stroker Kit
Nissan RB25/26 2.8 Litre Stroker Kit:
- Spool Billet 4340 full counter weight 77.7mm Stroker Crankshaft
- Spool H Beam Forged Connecting Rods with ARP-2000 Bolts (ARP L19 Bolts available as an upgrade)
- CP Custom Pistons (rings, pins and locks included)
- 9310 0.200" Gudgeon Pins standard (0.250" Pins available as an upgrade)
Nissan RB25/26 77.7mm Billet 4340 Stroker Crankshaft - Rated at 1000HP plus / 10,000rpm
Full billet 4340 Nitrided and Balanced Crankshaft
Note: The standard RB26 capacity is 2568cc
Using the 77.7mm stroker crank, std length conrods and custom pistons, the displacement is increased as follows:
- 86.5mm bore and the 77.7mm stroker crank = 2740cc / 172cc increase
- 87mm bore and the 77.7mm stroker crank = 2771cc / 203cc increase
With the increased cubic capacity from the 77.7mm stroker crank, big increases in torque and low to mid range power are achievable. Boost will come on earlier in the rev range and peak power will increase.
CP pistons come with rings, pins and locks. The gudgeon pins are upgraded to 9310 hardened alloy steel with 4.5mm wall thickness.
Note: Clearancing of the cylinder block is sometimes required.
|Product Name||Spool RB26 - RB28 2.8 L Stroker Kit|
We are an Australian based company which ships items nationally and international usually within 48 hours of receiving your order. All items shipped internationally are sent express air freight unless otherwise instructed.
You can calculate shipping rates inside the cart. After adding all the products you would like, navigate to the cart and fill in your Country, State and Postcode.
Our shipping providers do not deliver to PO Boxes.
If you have issues calculating freight please get in touch.
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure get in touch with firstname.lastname@example.org.