Small Block Ford Flat Top -2.6cc All Cleveland 4.040 bore, 3.850 stroke, 6.000 rod 64cc head 11.1 to 1 comp (CP Bullets BF6050-040)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Ford |
|
Engine Type |
Small Block |
|
Part Number |
BF6050-040 |
|
Bore (in) |
4.04 |
|
Stroke (in) |
3.85 |
|
Rod Length (in) |
6 |
|
Comp Height |
1.25 |
|
Head Type |
351C |
|
Head CC |
64 |
|
Dome / Dish Height |
FT |
|
Dom/Dish CC |
-2.5 |
|
Compression Ratio |
10.7 |
|
Pin |
.927 x 2.500 |
|
Ring Thickness |
1.5 x 1.5 x 3.0mm |
|
VR Depth |
-0.18 |
|
Cubic Inch |
395 |
|
Piston Weight |
449 |
|
Style |
FT |
|
Valve Reliefs |
1 VR |
|
Gas Port |
No |
| Product Name | Small Block Ford Flat Top -2.6cc All Cleveland 4.040 bore, 3.850 stroke, 6.000 rod 64cc head 11.1 to 1 comp (CP Bullets BF6050-040) |
|---|---|
| Brands | CP Carrillo |
| Engine | Ford V8 |
| Make | Ford |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the compression ratio for the BF6050-040 pistons?
The BF6050-040 pistons provide a compression ratio of 10.7:1 when used with 64cc 351C heads and a 3.850 stroke.
What is the recommended bore size for the BF6050-040 pistons?
These pistons are designed for a bore size of 4.040 inches, which is crucial for achieving the intended performance and compression ratio.
What is the weight of the BF6050-040 pistons?
The BF6050-040 pistons weigh 449 grams each, which is important to consider for balancing the rotating assembly.
Do the BF6050-040 pistons require any specific machining?
Yes, proper bore clearance must be established during installation, and ring gaps should be set according to your specific application and power goals.
What type of valve reliefs do the BF6050-040 pistons have?
The BF6050-040 pistons feature one valve relief, which is designed to accommodate typical valve sizes in Small Block Ford applications.
