Small Block Ford Dish -22.6cc All 20 deg. TFS Twisted 4.040 bore, 3.400 stroke, 5.400 rod 60cc head 8.6 to 1 comp (CP Bullets BF6011-040)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Ford |
|
Engine Type |
Small Block |
|
Part Number |
BF6011-040 |
|
Bore (in) |
4.04 |
|
Stroke (in) |
3.4 |
|
Rod Length (in) |
5.4 |
|
Comp Height |
1.09 |
|
Head Type |
STD/ TFS Twisted |
|
Head CC |
60 |
|
Dome / Dish Height |
-0.15 |
|
Dom/Dish CC |
-22.6 |
|
Compression Ratio |
8.5 |
|
Pin |
.927 x 2.500 |
|
Ring Thickness |
1.5 x 1.5 x 3.0mm |
|
VR Depth |
-.280 / SP |
|
Cubic Inch |
349 |
|
Piston Weight |
423 |
|
Style |
Dish |
|
Valve Reliefs |
3 VR's |
|
Gas Port |
No |
| Product Name | Small Block Ford Dish -22.6cc All 20 deg. TFS Twisted 4.040 bore, 3.400 stroke, 5.400 rod 60cc head 8.6 to 1 comp (CP Bullets BF6011-040) |
|---|---|
| Brands | CP Carrillo |
| Engine | Ford V8 |
| Make | Ford |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended compression ratio for the BF6011-040 pistons?
The BF6011-040 pistons are designed for a compression ratio of approximately 8.5:1 when used with a 60cc head. However, the final compression ratio may vary depending on the specific engine setup and machining tolerances.
What is the piston weight for the BF6011-040 pistons?
The BF6011-040 pistons weigh 423 grams each. It's important to consider this weight when balancing the rotating assembly for optimal performance.
What type of valve reliefs do the BF6011-040 pistons have?
The BF6011-040 pistons feature three valve reliefs, which are designed to accommodate typical camshaft profiles used in Small Block Ford applications.
What is the bore and stroke specification for the BF6011-040 pistons?
The BF6011-040 pistons are designed for a 4.040-inch bore and a 3.400-inch stroke, making them suitable for a 349 cubic inch Small Block Ford engine.
What is the recommended ring thickness for the BF6011-040 pistons?
The BF6011-040 pistons use a ring thickness of 1.5mm for the top and second rings, and 3.0mm for the oil ring. Ensure proper clearance and gap settings during installation.
