Small Block Chevy 4.060 Bore 3.500 stroke 5.7 Rod 1.550 CH -6cc Flat top , lateral Gas Ports, 1mm, 1mm, 2mm, rings - Lefts & Rights (CP Bullets BCRSE1350-060)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Chevrolet |
|
Engine Type |
Small Block Bullet Special Race Series |
|
Part Number |
BCRSE1350-060 |
|
Bore (in) |
4.06 |
|
Stroke (in) |
3.5 |
|
Rod Length (in) |
5.7 |
|
Comp Height |
1.55 |
|
Head Type |
All 23 deg heads |
|
Head CC |
64 |
|
Dome / Dish Height |
FT |
|
Dom/Dish CC |
-6 |
|
Compression Ratio |
10.5 |
|
Pin |
.927 x 2.500 |
|
Ring Thickness |
1.0 x 1.0 x 2.0mm |
|
VR Depth |
-.345 / SP |
|
Cubic Inch |
357 |
|
Piston Weight |
455 |
|
Style |
FT |
|
Valve Reliefs |
2 VR's |
|
Gas Port |
Yes |
| Product Name | Small Block Chevy 4.060 Bore 3.500 stroke 5.7 Rod 1.550 CH -6cc Flat top , lateral Gas Ports, 1mm, 1mm, 2mm, rings - Lefts & Rights (CP Bullets BCRSE1350-060) |
|---|---|
| Brands | CP Carrillo |
| Engine | SB Chevrolet / Holden |
| Make | GM |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
If you are outside of Australia, you are responsible for any duty or taxes charged by your government."
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the BCRSE1350-060 pistons?
For the BCRSE1350-060 pistons, a typical bore clearance of 0.0030" to 0.0035" is recommended. However, this can vary based on the specific application and operating conditions, so always consult with your engine builder for precise specifications.
What type of rings are included with the BCRSE1350-060 pistons?
The BCRSE1350-060 pistons come with a 1.0mm, 1.0mm, and 2.0mm ring set. Ensure that the ring gaps are set according to your engine's specifications and intended use.
What is the compression ratio of the BCRSE1350-060 pistons when used with 64cc heads?
The BCRSE1350-060 pistons provide a compression ratio of approximately 10.5:1 when paired with 64cc cylinder heads. Keep in mind that actual compression may vary based on factors such as head gasket thickness and chamber modifications.
Can the BCRSE1350-060 pistons be used with a supercharger or turbocharger?
Yes, the BCRSE1350-060 pistons can be used in boosted applications. However, ensure that the engine is properly tuned, and consider the boost levels, fuel quality, and overall engine build to maintain reliability.
What is the weight of the BCRSE1350-060 pistons, and how does it affect performance?
The BCRSE1350-060 pistons weigh 455 grams each. Lighter pistons can improve engine response and reduce reciprocating mass, but it's essential to balance them with the rest of the rotating assembly for optimal performance.
