2017-2022 Suzuki GSXR 1000 14.5:1 78mm bore x 55.1mm stroke (1053cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2017-2022 Suzuki GSXR 1000 14.5:1 78mm bore x 55.1mm stroke (1053cc) piston kit
|
Make |
Suzuki |
|
Engine Size |
1000cc |
|
Model |
GSXR 1000 |
|
Year |
2017-2022 |
|
Bore (mm) |
78mm |
|
Comp Ratio |
14.5:1 |
|
Piston Part Number |
MX4073 |
|
Gasket Part Number |
H4453SP1027S |
|
Conrod Part Number |
PSR10018 |
|
Pin Part Number |
W630-1650-13CP1C |
|
Locks Part Number |
630x050 SWL |
|
Rings |
CPXG-7800C |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2017-2022 Suzuki GSXR 1000 14.5:1 78mm bore x 55.1mm stroke (1053cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the MX4073 piston kit?
The recommended bore clearance for the MX4073 piston kit should be determined by the engine builder based on the specific application and intended use. Generally, a clearance of around 0.0015" to 0.0025" is common for performance applications, but always refer to the specific instructions provided with the kit.
What type of fuel is recommended for the 14.5:1 compression ratio of these pistons?
For the 14.5:1 compression ratio of the MX4073 piston kit, it is recommended to use high-octane fuel, typically 98 RON or higher, to prevent detonation and ensure optimal performance. Always consider the tuning and setup of the engine to match the fuel quality.
Do I need to modify my conrods when using the MX4073 piston kit?
When using the MX4073 piston kit, it is essential to check the compatibility of your conrods. Depending on the specific conrod part number (PSR10018), you may need to ensure proper clearance and fitment with the pistons, especially regarding the pin height and small-end dimensions.
What is the weight tolerance for the MX4073 pistons?
The MX4073 pistons are balanced to within +/- 1 gram, which is crucial for maintaining engine performance and reducing vibrations. Ensure that the entire rotating assembly is balanced together for optimal results.
Can I use the MX4073 pistons with stock cylinder heads?
Yes, the MX4073 pistons can be used with stock cylinder heads, but it is important to verify that the head's combustion chamber design can accommodate the increased compression ratio. Additionally, proper tuning and fuel management will be necessary to achieve reliable performance.
