2006-2011 Suzuki LTR 450 13.5:1 95.5mm std bore x 62.8mm stroke (449cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2006-2011 Suzuki LTR 450 13.5:1 95.5mm std bore x 62.8mm stroke (449cc) piston kit
|
Make |
Suzuki |
|
Engine Size |
450cc |
|
Model |
LTR 450 |
|
Year |
2006-2011 |
|
Bore (mm) |
95.5mm |
|
Comp Ratio |
13.5:1 |
|
Piston Part Number |
MX4011A |
|
Gasket Part Number |
C3208 |
|
Conrod Part Number |
PSR8811A |
|
Pin Part Number |
S748-2000-15C |
|
Locks Part Number |
748x050 SWL |
|
Rings |
CPN2-2-3759 |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2006-2011 Suzuki LTR 450 13.5:1 95.5mm std bore x 62.8mm stroke (449cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the MX4011A piston kit?
For the MX4011A piston kit, the recommended bore clearance should be determined by the engine builder based on the specific application and operating conditions. Generally, a clearance of around 0.0025" to 0.0030" is typical for performance applications, but always verify with your machining specifications.
What type of fuel is recommended for the 13.5:1 compression ratio of this piston kit?
For the 13.5:1 compression ratio of the MX4011A piston kit, it is advisable to use high-octane fuel, typically 98 RON or better, to prevent detonation and ensure optimal performance. Always consider tuning and engine setup to match fuel quality.
What are the specific machining requirements for installing the MX4011A piston kit?
When installing the MX4011A piston kit, ensure that the cylinder bore is properly honed to match the piston dimensions. Additionally, check the ring end gaps and adjust them according to the supplied instructions. Balancing the rotating assembly is also crucial for performance.
Can I use the MX4011A piston kit with stock conrods?
While the MX4011A piston kit can be used with stock conrods, it is recommended to upgrade to performance conrods for enhanced reliability, especially under high-stress conditions. Ensure that the conrods are compatible with the piston pin size and design.
What components are included in the MX4011A piston kit?
The MX4011A piston kit includes two forged pistons, a set of piston rings, wrist pins, and retaining clips. This complete kit is designed for ease of installation and optimal performance in the Suzuki LTR 450.
