2017-2021 Can-Am Maverick X3 9.5:1 74mm std bore x 69.7mm stroke (900)cc2019-2021 Skidoo Ace Turbo Sled 9.5:1 74mm std bore x 69.7mm stroke (900)cc
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2017-2021 Can-Am Maverick X3 9.5:1 74mm std bore x 69.7mm stroke (900)cc 2019-2021 Skidoo Ace Turbo Sled 9.5:1 74mm std bore x 69.7mm stroke (900)cc
|
Make |
CanAM |
|
Engine Size |
900cc |
|
Model |
Maverick X3 |
|
Year |
2017-2021 |
|
Bore (mm) |
74mm |
|
Comp Ratio |
9.5:1 |
|
Piston Part Number |
M9080 |
|
Gasket Part Number |
Call |
|
Conrod Part Number |
PSR10247 |
|
Pin Part Number |
708-2000-15CP1C |
|
Locks Part Number |
708x050 SWL |
|
Rings |
XC-2913 |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2017-2021 Can-Am Maverick X3 9.5:1 74mm std bore x 69.7mm stroke (900)cc2019-2021 Skidoo Ace Turbo Sled 9.5:1 74mm std bore x 69.7mm stroke (900)cc |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the M9080 pistons?
The recommended bore clearance for the M9080 pistons is typically around 0.0025" to 0.0030". However, it's crucial to consult the specific engine build instructions and adjust based on your engine's tolerances and operating conditions.
What type of fuel is best suited for the 9.5:1 compression ratio of these pistons?
For the 9.5:1 compression ratio, premium unleaded fuel with an octane rating of at least 95 RON is recommended. This helps prevent detonation and ensures optimal performance, especially under boost conditions.
Do I need to modify the cylinder head when using M9080 pistons?
In most cases, the cylinder head does not require modification when using M9080 pistons, as they are designed to fit standard specifications. However, it's advisable to check for clearance and ensure the head gasket surface is properly prepared.
What is the weight tolerance for the M9080 pistons?
The M9080 pistons are balanced to within +/- 1 gram. This precision helps maintain engine balance and reduces vibrations, which is critical for high-performance applications.
What components are included in the M9080 piston kit?
The M9080 piston kit includes two forged pistons, ring sets, wrist pins, and clips. Ensure all components are inspected for quality and fitment prior to installation.
