2009 + Arctic Cat Z1 Turbo, 9.5:1 98mm std bore x 70mm stroke (1056cc) piston Kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2009 + Arctic Cat Z1 Turbo, 9.5:1 98mm std bore x 70mm stroke (1056cc) piston Kit
|
Make |
Arctic Cat |
|
Engine Size |
1056cc |
|
Model |
Arctic Cat Z1 Turbo |
|
Year |
2009 + |
|
Bore (mm) |
98mm |
|
Comp Ratio |
9.5:1 |
|
Piston Part Number |
M9063 |
|
Gasket Part Number |
Call |
|
Conrod Part Number |
PSR6131 |
|
Pin Part Number |
945-2500-19CP3C |
|
Locks Part Number |
945x073 SWL |
|
Rings |
CPN-3858 |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2009 + Arctic Cat Z1 Turbo, 9.5:1 98mm std bore x 70mm stroke (1056cc) piston Kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What are the recommended piston to cylinder clearances for the M9063 piston kit?
For the M9063 piston kit, it is crucial to follow the specific instructions provided with the kit regarding piston to cylinder clearances. Typically, a clearance of 0.0025" to 0.0030" is common for performance applications, but always verify with your engine builder for the best fitment based on your specific setup.
What type of rings are included in the M9063 piston kit?
The M9063 piston kit includes high-performance rings identified by part number CPN-3858. These rings are designed to provide optimal sealing and durability under high boost conditions typical of the Arctic Cat Z1 Turbo.
What is the compression ratio of the M9063 piston kit and how does it affect performance?
The M9063 piston kit has a compression ratio of 9.5:1. This ratio is a good balance for turbocharged applications, providing a combination of power and reliability. However, tuning and fuel quality will significantly influence overall performance.
Are there any specific machining requirements for installing the M9063 pistons?
Yes, when installing the M9063 pistons, ensure that the cylinder bores are properly honed to match the 98mm diameter of the pistons. Additionally, check that the ring gaps are set according to the supplied instructions for optimal performance.
What material are the M9063 pistons made from and what are the benefits?
The M9063 pistons are forged from high strength 2618 alloy, which offers excellent strength and thermal stability. This material is ideal for high-performance applications, as it can withstand the increased pressures and temperatures associated with turbocharging.
