2005-2015 RXP 215/255/260 9.5:1 turbo 100mm std bore x 63.4mm stroke (1494cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2005-2015 RXP 215/255/260 9.5:1 turbo 100mm std bore x 63.4mm stroke (1494cc) piston kit
|
Make |
SeaDoo |
|
Engine Size |
1500cc |
|
Model |
RXP 215/255/260 |
|
Year |
2005-2015 |
|
Bore (mm) |
100mm |
|
Comp Ratio |
9.5:1 |
|
Piston Part Number |
M9039A |
|
Gasket Part Number |
H3022SP4030 |
|
Conrod Part Number |
PSR5476 |
|
Pin Part Number |
905-2250-19CP3C |
|
Locks Part Number |
905X073 SWL |
|
Rings |
CPN-3937 |
|
Shelf (RPO) or Made to Order (MTO) |
MTO |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2005-2015 RXP 215/255/260 9.5:1 turbo 100mm std bore x 63.4mm stroke (1494cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the M9039A piston kit?
The recommended bore clearance for the M9039A piston kit should be determined by the engine builder based on the specific application and tolerances. Generally, a clearance of 0.0015" to 0.0025" is a good starting point for performance applications, but always refer to the manufacturer's specifications and guidelines.
Can I use the M9039A pistons with a stock conrod?
Yes, the M9039A pistons can be used with stock conrods, provided that the conrods are in good condition and can handle the increased performance. However, it's advisable to check the compatibility with the specific conrod part number PSR5476 for optimal performance.
What type of fuel is recommended for the M9039A piston kit?
For the M9039A piston kit, it is recommended to use high-octane fuel, ideally 98 RON or higher, especially if the engine is tuned for boost. This will help prevent detonation and ensure reliable performance under load.
Are there any specific machining requirements for the M9039A pistons?
Yes, the M9039A pistons may require specific machining such as honing of the cylinder bore to achieve the correct clearance and ensure proper fitment. It's essential to follow the instructions provided with the pistons and consult with an experienced engine builder for best practices.
What is included in the M9039A piston kit?
The M9039A piston kit includes two forged pistons, ring sets, wrist pins, and clips. This complete kit is designed for ease of installation and optimal performance in the Sea-Doo RXP 215/255/260 engines.
