2011-2014 Polaris RZR XP900 9.0:1 Turbo 93mm std bore x 64.4mm stroke (875cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2011-2014 Polaris RZR XP900 9.0:1 Turbo 93mm std bore x 64.4mm stroke (875cc) piston kit
|
Make |
Polaris |
|
Engine Size |
900cc |
|
Model |
RZR 900 XP |
|
Year |
2011-2014 |
|
Bore (mm) |
93mm |
|
Comp Ratio |
9.0:1 |
|
Piston Part Number |
M9035 |
|
Gasket Part Number |
C3446 |
|
Conrod Part Number |
PSR6866 |
|
Pin Part Number |
787-2250-16CP1C |
|
Locks Part Number |
787x050 SWL |
|
Rings |
CPN-3661 |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2011-2014 Polaris RZR XP900 9.0:1 Turbo 93mm std bore x 64.4mm stroke (875cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What are the recommended clearances for the M9035 piston kit?
For the M9035 piston kit, it's crucial to follow the manufacturer's specifications for piston-to-cylinder clearance and ring end gaps. Typically, a clearance of 0.0025" to 0.0035" is common for performance applications, but always refer to the supplied instructions for precise measurements.
What type of fuel is recommended for the 9.0:1 compression ratio?
With a 9.0:1 compression ratio, it is advisable to use high-quality pump fuel with an octane rating of at least 91 RON to prevent detonation, especially under boost conditions. Always consider tuning and fuel quality for optimal performance.
Do I need to modify my engine for the M9035 piston kit?
Installation of the M9035 piston kit may require machining of the cylinder head for proper clearance, especially if you are running a turbo setup. Ensure that the engine is properly assembled with adequate clearances and that the rotating assembly is balanced.
Is this piston kit suitable for high boost applications?
The M9035 piston kit is designed for turbo applications and can handle moderate boost levels effectively. However, reliability at high boost will depend on proper tuning, fuel quality, and overall engine build quality. Always monitor engine parameters closely.
What is included in the M9035 piston kit?
The M9035 piston kit includes two forged pistons, a set of rings, wrist pins, and clips. Ensure all components are inspected for quality and fitment before installation.
