2005-2015 RXP 215/255/260 8.4:1 turbo 100.25mm +.25mm oversize bore x 63.4mm stroke (1501cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2005-2015 RXP 215/255/260 8.4:1 turbo 100.25mm +.25mm oversize bore x 63.4mm stroke (1501cc) piston kit
|
Make |
SeaDoo |
|
Engine Size |
1500cc |
|
Model |
RXP 215/255/260 |
|
Year |
2005-2015 |
|
Bore (mm) |
100.25mm |
|
Comp Ratio |
8.4:1 |
|
Piston Part Number |
M9033 |
|
Gasket Part Number |
H3022SP4030 |
|
Conrod Part Number |
PSR5476 |
|
Pin Part Number |
905-2250-19CP3C |
|
Locks Part Number |
905X073 SWL |
|
Rings |
SWF-20064-3 |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2005-2015 RXP 215/255/260 8.4:1 turbo 100.25mm +.25mm oversize bore x 63.4mm stroke (1501cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the M9033 piston kit?
For the M9033 piston kit, the recommended bore clearance should be set according to the specific engine build and application. Generally, a clearance of 0.0025" to 0.0035" is typical for performance applications, but always consult the manufacturer's instructions and adjust based on your engine's specific requirements.
What type of fuel is recommended for the M9033 piston kit?
The M9033 piston kit is designed for use with high-octane fuel, especially when used in turbo applications. A minimum of 98 RON fuel is recommended to ensure optimal performance and to prevent detonation, particularly at higher boost levels.
Do I need to modify my engine for the M9033 pistons?
Yes, installing the M9033 pistons may require modifications to your engine, including proper honing of the cylinder bores to accommodate the 100.25mm oversize. Additionally, ensure that your engine's compression ratio and tuning are adjusted to match the 8.4:1 ratio for optimal performance.
What is included in the M9033 piston kit?
The M9033 piston kit includes two forged pistons, a complete set of rings, wrist pins, and locking clips. This kit is designed for a straightforward installation, but always ensure proper fitting and clearances during assembly.
What are the benefits of using the M9033 pistons in a turbocharged application?
The M9033 pistons are forged from high-strength 2618 alloy and feature double forced pin oilers, which provide enhanced durability and heat resistance. This makes them suitable for high-performance turbo applications, allowing for increased horsepower while maintaining reliability under boost.
