Harley Twin Cam, 88 cu in, 3.750 bore, 4.000 stroke, 9.75:1
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
Harley Twin Cam, 88 cu in, 3.750 bore, 4.000 stroke, 9.75:1
|
Make |
Harley Davidson |
|
Engine Size |
88 CI |
|
Model |
Twin Cam |
|
Bore (in) |
3.75 |
|
Stroke (in) |
4 |
|
Comp Ratio |
9.75:1 |
|
Dome CC |
9.9 |
|
Comp Height |
1.27 |
|
Piston Part Number |
M5011 |
|
Conrod Part Nmber |
PSR6161 |
|
Pint Part Number |
927-2500-15CP1C |
|
Locks Part Number |
927x073 SWL |
|
Rings |
RS1110-3750-0 |
|
Shelf (RPO) or Made to Order (MTO) |
MTO |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | Harley Twin Cam, 88 cu in, 3.750 bore, 4.000 stroke, 9.75:1 |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the M5011 pistons?
For the M5011 pistons, a typical bore clearance is around 0.0025" to 0.0030". However, it's essential to verify this with your specific engine setup and ensure proper fitment according to the manufacturer's guidelines.
What type of rings are included with the M5011 piston kit?
The M5011 piston kit includes RS1110-3750-0 rings. Ensure to follow the specific ring end gap settings provided with the kit for optimal performance.
What is the compression height of the M5011 pistons?
The compression height of the M5011 pistons is 1.27 inches. This measurement is crucial for maintaining the correct compression ratio and engine performance.
Can the M5011 pistons be used with aftermarket conrods?
Yes, the M5011 pistons can be used with aftermarket conrods, such as the PSR6161. Ensure that the conrod and piston combination maintains the proper clearances and fits within the engine's specifications.
What is the dome volume of the M5011 pistons?
The dome volume of the M5011 pistons is 9.9 cc. This volume plays a significant role in determining the overall compression ratio of your engine.
