2008-2021 Suzuki GSXR 600 13.5:1 69mm +2mm bore x 42.5mm stroke (636cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2008-2021 Suzuki GSXR 600 13.5:1 69mm +2mm bore x 42.5mm stroke (636cc) piston kit
|
Make |
Suzuki |
|
Engine Size |
600cc |
|
Model |
GSXR 600 |
|
Year |
2008-2021 |
|
Bore (mm) |
69mm |
|
Comp Ratio |
13.5:1 |
|
Piston Part Number |
M4060 |
|
Gasket Part Number |
C8302 |
|
Conrod Part Number |
PSR9586 |
|
Pin Part Number |
551-1500-140C |
|
Locks Part Number |
551x047 SWL |
|
Rings |
MAC06900 |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2008-2021 Suzuki GSXR 600 13.5:1 69mm +2mm bore x 42.5mm stroke (636cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What are the recommended piston-to-cylinder clearances for the M4060 piston kit?
For the M4060 piston kit, it's crucial to follow the manufacturer's guidelines for piston-to-cylinder clearances. Typically, this will depend on the specific application and intended use of the engine. Ensure you consult the supplied instructions for the exact specifications.
What type of fuel is recommended for the 13.5:1 compression ratio of the M4060 pistons?
With a 13.5:1 compression ratio, it's advisable to use high-octane fuel to prevent knocking and ensure optimal performance. Consider using premium unleaded fuel or race fuel, depending on your tuning and application.
Do I need to modify my cylinder head to use the M4060 piston kit?
While the M4060 piston kit is designed to fit the Suzuki GSXR 600, you may need to check for clearance with the cylinder head, especially if you're using aftermarket components or have modified the engine. It's recommended to verify that there is adequate clearance to avoid any interference.
What is the weight of the M4060 pistons, and how does it affect engine balance?
The M4060 pistons are designed to be lightweight, which aids in reducing reciprocating mass and improving engine response. However, it's essential to balance the entire rotating assembly, including the crankshaft and conrods, to maintain optimal performance and reliability.
What components are included in the M4060 piston kit?
The M4060 piston kit includes two forged pistons, ring sets, wrist pins, and clips. This complete kit ensures you have everything needed for installation, but always verify compatibility with your existing components before proceeding.
