2001-2004 Suzuki GSXR 1000 12.0:1 bore x 59mm stroke (1043cc) piston kit for Nitrous 80 shot piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2001-2004 Suzuki GSXR 1000 12.0:1 bore x 59mm stroke (1043cc) piston kit for Nitrous 80 shot piston kit
|
Make |
Suzuki |
|
Engine Size |
1000cc |
|
Model |
GSXR 1000 |
|
Year |
2001-2004 |
|
Bore (mm) |
73mm |
|
Comp Ratio |
12.0:1 |
|
Piston Part Number |
M4057 |
|
Gasket Part Number |
Call |
|
Conrod Part Number |
PSR7346 |
|
Pin Part Number |
630-2000-15CP3C |
|
Locks Part Number |
630X050 SWL |
|
Rings |
XA-2874 |
|
Shelf (RPO) or Made to Order (MTO) |
MTO |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2001-2004 Suzuki GSXR 1000 12.0:1 bore x 59mm stroke (1043cc) piston kit for Nitrous 80 shot piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the M4057 piston kit?
For the M4057 piston kit, the recommended bore clearance typically ranges from 0.0025" to 0.0035". However, it's crucial to confirm this with your specific engine build and conditions, as clearance can vary based on factors like temperature and intended use.
Can I use the M4057 pistons with a stock conrod?
Yes, the M4057 pistons can be used with stock conrods, but it's essential to ensure that the conrods are in good condition and can handle the increased power levels associated with nitrous use. Upgrading to performance conrods is recommended for reliability.
What type of fuel should I use with the M4057 piston kit for optimal performance?
For optimal performance with the M4057 piston kit, it's advisable to use high-octane fuel, especially when running nitrous. A minimum of 98 RON is recommended to prevent detonation and ensure the engine operates reliably under increased load.
What are the implications of using nitrous with the M4057 pistons?
Using nitrous with the M4057 pistons can significantly increase horsepower, but it also places additional stress on engine components. Proper tuning, fuel quality, and monitoring of air-fuel ratios are critical to prevent engine damage.
How should I prepare the M4057 pistons before installation?
Before installation, ensure the M4057 pistons are cleaned thoroughly and check the ring gaps according to the supplied instructions. It's also important to verify that the piston-to-cylinder clearance is within the recommended specifications for your specific application.
