2005-2007 Suzuki King Quad 700 11.5:1 104mm +2mm oversize bore x 85mm stroke piston kit
Make
Suzuki
Engine Size
700cc 750cc
Model
King Quad 700 / 750
Year
2005-2007
Bore (mm)
104mm
Comp Ratio
11.5:1
Piston Part Number
M4051A
Gasket Part Number
C3128
Conrod Part Number
Custom
Pin Part Number
W905-2250-15CP1C
Locks Part Number
905X073 SWL
Rings
1-MS13-4095
2-MS21-4095-THG
3-H38-4095-0
Shelf (RPO) or Made to Order (MTO)
ROP
Proudly made in the USA by CP Carrillo Pistons!
Fully CNC machined
Balanced to +/- 1 gram
Double forced pin oilers
Forged from high strength 2618 alloy
Designed for maximum performance, horsepower and reliability
Complete kit includes two pistons, ring sets, wrist pins and clips
Follow ring end gap and piston to cylinder clearances as per the supplied instructions
More Information
Product Name
2005-2007 Suzuki King Quad 700 11.5:1 104mm +2mm oversize bore x 85mm stroke piston kit
Brands
CP Carrillo
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What are the recommended piston-to-cylinder clearances for the M4051A piston kit?
For the M4051A piston kit, it is crucial to follow the manufacturer's specifications for piston-to-cylinder clearances. Typically, this will depend on the application and can vary based on the engine builder's preferences. Ensure to consult the supplied instructions for the specific clearance recommendations.
What type of conrods are compatible with the M4051A piston kit?
The M4051A piston kit is designed for use with custom conrods that are compatible with the Suzuki King Quad 700/750 engine. Ensure that the conrods are suitable for the increased performance and compression ratio of this piston kit.
What is the compression ratio of the M4051A piston kit and how does it affect performance?
The M4051A piston kit has a compression ratio of 11.5:1. This higher compression ratio can lead to increased power and torque, but it requires careful tuning and high-quality fuel to avoid detonation. Ensure your engine is set up to handle this compression for optimal performance.
What type of rings are included in the M4051A piston kit?
The M4051A piston kit includes a complete set of rings: 1-MS13-4095, 2-MS21-4095-THG, and 3-H38-4095-0. It is important to follow the manufacturer's guidelines for setting the ring gaps to ensure proper sealing and performance.
What machining processes should be considered when installing the M4051A piston kit?
When installing the M4051A piston kit, ensure that the cylinder bores are properly honed to match the 104mm oversize pistons. Additionally, check the ring gaps and piston-to-wall clearances as per the supplied instructions. Proper machining is essential for achieving the best performance and reliability.
