2012-2021 Kawasaki ZX14 9.5:1 Turbo 84mm std bore x 65mm stroke (1441cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2012-2021 Kawasaki ZX14 9.5:1 Turbo 84mm std bore x 65mm stroke (1441cc) piston kit
|
Make |
Kawasaki |
|
Engine Size |
1352cc |
|
Model |
ZX14 |
|
Year |
2012-2021 |
|
Bore (mm) |
84mm |
|
Comp Ratio |
9.5:1 |
|
Piston Part Number |
M4048 |
|
Gasket Part Number |
Call |
|
Conrod Part Number |
PSR7291 |
|
Pin Part Number |
787-2000-12CP1C |
|
Locks Part Number |
787x050 SWL |
|
Rings |
CPN-3307 |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2012-2021 Kawasaki ZX14 9.5:1 Turbo 84mm std bore x 65mm stroke (1441cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the M4048 piston kit?
For the M4048 piston kit, the recommended bore clearance should be set according to the specifications provided by CP Carrillo. Typically, this will depend on the specific application and operating conditions, so it's crucial to consult the supplied instructions for precise measurements.
What type of conrods are compatible with the M4048 piston kit?
The M4048 piston kit is designed to work with the PSR7291 conrods. Ensure that the conrods are properly matched and that all components are installed with the correct clearances for optimal performance.
Can I use the M4048 piston kit with a stock Kawasaki ZX14 engine?
Yes, the M4048 piston kit can be used with a stock Kawasaki ZX14 engine, but modifications may be necessary to achieve the best performance. Pay attention to tuning, fuel quality, and boost levels to ensure reliability and performance gains.
What is the expected compression ratio with the M4048 piston kit?
The M4048 piston kit provides a compression ratio of 9.5:1 when installed in an 84mm bore engine. This ratio is suitable for turbo applications, but it's essential to verify that your setup can handle this compression level safely.
What materials are the M4048 pistons made from?
The M4048 pistons are forged from high strength 2618 alloy, which provides excellent durability and performance characteristics, particularly in high-boost applications. This material choice is ideal for maintaining reliability under increased stress.
